Safety Precautions:
The safety precautions listed below are intended to ensure your safety
whenever you use the REM.
NEVER OPEN THE CASE – Never try to separate the two pieces of the
chassis from one another and/or modify the equipment. Opening this
device will effectively void the warranty.
STOP USE IN CASE OF PROBLEM – Stop using the equipment if ever you
should notice smoke or a strange odor coming from it.
Contact Koltai@pigtronix.com for service.
AVOID HIGH TEMPERATURES & HEAT BUILD UP – Never cover the power
supply with cloth or other objects. Built up heat creates a danger of
equipment deformation and fire. Do not expose the REM to direct
sunlight, heating devices, or other extreme temperatures.
USE SPECIFIED POWER ADAPTOR ONLY – Be sure to use only the 18-Volt DC
300mA Adapter that came with your Pigtronix REM.
DO NOT EXPOSE TO WATER/BEER – To reduce the risk of fire or electric
shock, do not expose your REM to rain or moisture. If water gets inside the
unit, turn off the power.
Final Notes:
Years of work have gone into making the REM Pedal possible. We would
like to thank the following people for their help along the way:
Howard Davis, Lisa Rickmers, the Bethke and Koltai families, Matt Smith,
Paul Schwartz at Peekamoose Guitars, Soulive & Lettuce, Greg Tobler,
Hector Castillo, Aaron Reed, Dan Pavone, Kevin Tobler, Ben Artes, Fitz and
B-Dawg.
Howard “Mick” Davis and David Koltai designed the Pigtronix Keymaster
during 2008 & 2009 in Brooklyn, Yonkers and Port Jefferson, NY.
We hope you enjoy your new REM pedal! Please check our website,
www.pigtronix.com or contact us at (631) 331-PIGS (7447) for the latest
information on new Pigtronix gear.
Dave Koltai & Brian Bethke
Pigtronix
To Previous Page
Loading...
