EasyManua.ls Logo

Pihernz Superstar 3900 - Additional Safety Precautions; Environmental and Electrical Safety; Functions and Features Overview; Key Radio Capabilities

Pihernz Superstar 3900
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 19 -
Do not operate this radio in wet place or excessive
humidity areas, such as shower room
and swimming pools. It may result in electric shock, fire and/or malfunction.
Do not place conductive materials, such as water or metal in close proximity to the radio.
A short-circuit may result in electric shock, fire and/or malfunction.
Do not touch the heatsink as it may become very hot during and /after the transmission.
Use only a DC power supply of correct voltage and current.
Do not connect the cables in reverse polarity. It may result in electric shock, fire and/or
malfunction.
Do not modify or remove fuse-assembly from the DC-cable. It may result in fire, electric
shock and/or damage to the radio.
Do not use the radio if a strange sound, smoke and or strange odors, when the radio is
dropped and damaged, when a liquid penetrated inside, when a power-cord is damaged.
Contact with the Authorized Technical Service for checking and/or repair.
Turn off the radio and remove the antenna if a thun
derstorm is likely.
Do not use the radio in proximity to a TV or radio. It may cause interference in these
devices.
Do not install in a humid, dusty or insufficiently ventilated place.
Do not install the radio in an unstable or vibrating surface.
Do not install the radio in proximity to a heat and humidity source, or in direct sunlight.
Turn off and remove the power-source when the radio is not in use for extended period
of time.
Always turn off the power supply when connecting or disconnecting the radio power
cables.
When install the radio as a fixed station, make sure that the antenna ground is not
common with the ground of the power supply.
FUNCTIONS & FEATURES
:
PA/FM/AM/USB/LSB modes.
SWR, PWR, RX RSSI S-Meter.
PC programmable.
SQ, ASQ function.
RF gain adjustment.
MIC gain adjustment.
Roger beep programmable.
NB/ANL function.
Beep prompt.
TOT function.
HI-CUT function.
Busy channel lockout.
Backlight adjustment.
SWR protection.
Voltage protection.
VOX function.
RX noise reduction.
TX noise reduction.