PIKO Digi 1 - Supplementary Digital Components from PIKO

Supplementary digital components from PIKO:
22
55007 Desk top transformer T4 72VA
Can be used to supply power to the PIKO Digi power box or
as a lighting transformer
input: 220V-
output: 16V - 72 VA, with 4 connecting clips
55005 Desk top transformer T3 28VA
Can be used to supply power to PIKO Digi 1
and PIKO Digi 2
Input :220V-
Output: 16V-28VA
55021 connection lead for Digi 1 / 2 to transformer
If the T3 desktop transformer is to be used with the
PIKO Digi 1 the lead with the low voltage plug #55021
is required.
55011 PIKO digital basic set
- PIKO Digi remote control
- PIKO Digi 1
- Desk top transformer 220V-, sec
16V - 28VA
- connecting clip
- 2 PIKO loco decoders #56120
- connecting lead for T3 desk top
transformer
55012 PIKO Digi 2
- PIKO Digi 2
- 4 connectors for isolation rails
- connecting clip
- connection lead for T3 desk top
transformer
55019 PIKO Digi-fern remote control
- incl. 4 batteries
55275 connecting clip for digital layouts
connecting clip without EMV - suppressor essential for
digital layouts fits G231
55030 PIKO switch decoder for magnetic components
Switch decoder to switch magnetic components via two independent
addresses e.g. turnouts, signals, etc.
55031 PIKO switch decoder for electric units
Switch decoder for electric units via two independent addresses such
as lamps, motors etc.
55015 PIKO Digi power box
control centre for a complex digital layout.