8
◆ Setting Example-1: Modify Communication Address
1. Long press (> 3S) Enter key to enter the configuration data modification interface, enter
the correct password
2. Short press the flip key, enter the Adr menu.
3. Short press the Enter key, the address data starts flashing.
4. Under this interface short press the flip key for modifying data, short press the Enter key
to shift.
5. After modifying the data to the desired address, press (> 3S) Enter button to save the
address.
6. Complete address modification.
◆ Setting Example-2: Clear Energy
1. Long press (> 3S) Enter key to enter the configuration data modification interface, enter
the correct password
2. Short press the flip key, enter the Clr menu
3. Short press the Enter key, the remove command starts flashing, the default display (no)
command
4. Under this interface short press the flip key for choosing (YES) or (no) command.
5. Select (YES) to clear energy, (no) does not clear, long press the Enter key (> 3S) to
confirm
6. Automatically back to CLr menu.
7. Main Technical Data
To Next Page
Loading...
Need help?
General
