Operating Manual 3
NOTICE
Before installing the module you should read and consider the “PSS
SB DI8O8 Installation Manual” and the “SafetyBUS p System
Manual”.
Intended use
The PSS SB DI8O8 is a decentralised input/output module which has
been designed for use as an input/output device on SafetyBUS p.
System requirements
CPU versions
The PSS SB DI8O8 is supported by all SafetyBUS p-compatible safety
systems in the PSS-range.
System software versions
The following system software is required in order to configure the module:
• PSS WIN-PRO from version 1.0.0
To Next Page
Loading...
