Need help?Do you have a question about the Pilz 541 053 and is the answer not in the manual?
General| Product type | Safety switch |
|---|---|
| Housing material | Plastic |
| Protection type | IP67 |
| Contact type | 1 NC/1 NO |
| Rated voltage | 24 V DC |
| Rated current | 4 A |
| Operating temperature | -25 °C to +70 °C |
| Connection type | M12 connector |
| Standards | EN 60947-5-1 |
| Mechanical life | 1, 000, 000 cycles |
| Electrical life | 100, 000 cycles |
| Actuator type | Separate actuator |
Defines the safety functions of the switch and its adherence to relevant safety standards.
Explains the basic operation, output states, and provides a system block diagram.
Details assured/typical distances, and permitted lateral/vertical offsets for installation.
Provides pin configuration, connector type, wire colors, and connection guidelines.
Shows connection diagrams and lists suitable Pilz evaluation devices.
Describes the mounting process for actuators cs1.1 and cs3.1, including parallel assembly.
Lists specific operating and release distances for Actuator 2.
Lists specific operating and release distances for PSEN cs3.1 low profile actuators.
Details safety ratings (PL, SIL) and mission time (Tm) for compliance.
To Next Page
