EasyManua.ls Logo

Pilz PSEN User Manual

Pilz PSEN
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
22 126-02
PSEN ma1.4p-50
- 1 -
4 D Betriebsanleitung
4 GB Operating instructions
4 F Manuel d'utilisation
22 126-02PSEN ma1.4p-50
Sicherheitsschalter PSEN ma1.4p-50
833339787
Der Sicherheitsschalter erfüllt Forderungen der
EN 60204-1.
Der Sicherheitsschalter erfüllt EN 60947-5-3
nur zusammen mit dem Betätiger
PSEN ma1.4-03mm oder PSEN ma1.4-10mm
und hierfür zugelassenen Auswertegeräten.
Schließen Sie den Sicherheitsschalter nur an
Auswertegeräte an, die im Abschnitt "An-
schlüsse" aufgeführt sind.
Safety switch PSEN ma1.4p-50
The safety switch meets the requirements of
EN 60204-1.
The safety switch only complies with
EN 60947-5-3 in conjunction with the actuator
PSEN ma1.4-03mm or PSEN ma1.4-10mm
and its approved evaluation devices.
The safety switch should only be connected to
the evaluation devices listed under "Connec-
tions".
Capteur de sécurité PSEN ma1.4p-50
Le capteur de sécurité satisfait aux exigences
de l'EN 60204-1.
Le capteur de sécurité est conforme à la norme
EN 60947-5-3 uniquement lorsqu'il est utilisé
avec l'actionneur PSEN ma1.4-03mm ou
PSEN ma1.4-10mm et les unités de contrôle
spécialement homologuées.
Ne raccordez le capteur de sécurité qu'aux uni-
tés de contrôle indiquées dans le chapitre
« Raccordements ».
Zu ihrer Sicherheit
547263243
` Installieren und nehmen Sie das Gerät nur
dann in Betrieb, wenn Sie diese Betriebsan-
leitung gelesen und verstanden haben und
Sie mit den geltenden Vorschriften über Ar-
beitssicherheit und Unfallverhütung vertraut
sind.
Beachten Sie die VDE- sowie die örtlichen
Vorschriften, insbesondere hinsichtlich
Schutzmaßnahmen
` Durch Öffnen des Gehäuses oder eigen-
mächtige Umbauten erlischt jegliche Ge-
währleistung.
777809547
` Entfernen Sie die Schutzkappe erst unmittel-
bar vor Anschluss des Geräts.
For your safety
`
Only install and commission the unit if you
have read and understood these operating
instructions and are familiar with the applica-
ble regulations for health and safety at work
and accident prevention.
Ensure VDE and local regulations are met,
especially those relating to safety.
` Any guarantee is rendered invalid if the hous-
ing is opened or unauthorised modifications
are carried out.
` Do not remove the protective cap until you
are just about to connect the unit.
Pour votre sécurité
`
Vous n'installerez l'appareil et ne le mettrez
en service qu'après avoir lu et compris le
présent manuel d'utilisation et vous être fa-
miliarisé avec les prescriptions en vigueur
sur la sécurité du travail et la prévention des
accidents.
Respectez les normes locales ou VDE, parti-
culièrement en ce qui concerne la sécurité.
` L'ouverture de l'appareil ou sa modification
annule automatiquement la garantie.
` Veuillez retirer le cache de protection avant
de raccorder l'appareil.
Gerätemerkmale
1091646731
` Zum Sicherheitsschalter gehört der Betätiger
PSEN ma1.4-03mm oder
PSEN ma1.4-10mm
510237579
` 2 Sicherheitskontakte (Schließer)
1091670795
` Betätiger PSEN ma1.4-03mm:
Gesicherter Schaltabstand: 3 mm
Gesicherter Ausschaltabstand: 12 mm
` Betätiger PSEN ma1.4-10mm:
Gesicherter Schaltabstand: 10 mm
Gesicherter Ausschaltabstand: 22 mm
510316939
` eckige Bauform
510321547
` Wirkweise magnetisch
510477451
` Schaltspannung 24 V DC
Unit features
` The safety switch is used with the actuator
PSEN ma1.4-03mm or PSEN ma1.4-10mm
` 2 safety contacts (N/O)
` Actuator PSEN ma1.4-03mm:
Assured operating distance: 3 mm
Assured release distance: 12 mm
` Actuator PSEN ma1.4-10mm:
Assured operating distance: 10 mm
Assured release distance: 22 mm
` Square design
` Works magnetically
` Switching voltage 24 VDC
Caractéristiques de l'appareil
` L'actionneur PSEN ma1.4-03mm ou
PSEN ma1.4-10mm est associé au capteur
de sécurité.
` 2 contacts de sécurité (contacts à fermeture)
` Actionneur PSEN ma1.4-03mm :
Distance de commutation de sécurité :
3 mm
Distance de déclenchement de
sécurité : 12 mm
` Actionneur PSEN ma1.4-10mm :
Distance de commutation de sécurité :
10 mm
Distance de déclenchement de
sécurité : 22 mm
` architecture rectangulaire
` actionnement magnétique
` tension commutée 24 V DC
Question and Answer IconNeed help?

Do you have a question about the Pilz PSEN and is the answer not in the manual?

Pilz PSEN Specifications

General IconGeneral
TypeSafety switch
Housing MaterialPlastic or Metal
Protection ClassIP67
FunctionSafety Interlock
Safety CategoryCategory 4 (EN ISO 13849-1)
Contacts2 NC
Voltage Rating24 VDC
Mechanical Life1, 000, 000 cycles
Electrical Life1 x 10^5 operations (depending on the model)

Summary

Safety Switch PSEN ma1.4p-50

For Your Safety

Important safety instructions and precautions for installation and operation.

Unit Features

Key characteristics and specifications of the PSEN ma1.4p-50 safety switch.

Operating Distances

Lateral and Vertical Offset

Impact of lateral and vertical offset on assured operating distance (Sao).

Wiring

Connections

Details terminal assignment and connection pinouts for various evaluation devices.

Connection to Evaluation Devices

Connection to PSS Systems

Specific connection instructions for PSS controllers with or without SafetyBUS p.

Installation

Installation Precautions

Important cautions regarding environment, seals, and handling of components.

Installation Type 1

Mounting Procedure Variant 1

Step-by-step guide for mounting the safety switch and actuator according to Type 1.

Actuator Surface Alignment

Information on orienting the actuator's active surface towards the sensor.

Installation Type 2

Mounting Procedure Variant 2

Step-by-step guide for mounting the safety switch and actuator according to Type 2.

Adjustment

Function Testing

Guidance on testing the function with approved evaluation devices.

Mounting Orientation Impact

Explanation of how mounting orientation affects operating distances.

Offset Considerations

Notes on maximum permitted lateral and vertical offsets for accurate operation.

Technical Details

Electrical Data

Key electrical specifications including voltage, resistance, current, and frequency.

Environmental Data

Environmental parameters such as temperature, vibration, EMC, and shock stress.

Mechanical Data

Actuator Hysteresis

Typical hysteresis values for PSEN ma1.4-03mm and PSEN ma1.4-10mm actuators.

Switching Distances

Detailed assured operating (Sao) and release (Sar) distances for actuators.

Mechanical Data Continued

Safety Switch Spacing

Minimum distance requirement between safety switches.

Actuator and Housing Specifications

Covers actuator weight, connection type, cable, protection, and housing material.

Safety-Related Characteristic Data

B10d and Lambda Values

Safety characteristic data including B10d and Lambda values according to standards.

EC Declaration of Conformity

Related product manuals