Pima FORCE Series User Manual

FORCE Series Intruder Alarm System User Guide
8 PIMA Electronic Systems
LED
Type
Status
Indication
Green
Ready
To Arm
Steady On
No alarm or fault exist, all non-delayed zones are closed.
Off
A zone is open, or a fault exists.
Blue
AC
Power
Steady On
AC power OK
Orange
Fault
Flashes
Faults exist
Off
No fault exist, or the system is armed.
2.1.4 Operation keys and keypad alarms
Quick access keys
Press and hold the keys described in the next table, for the following operations:
Key
Operation
1-4
Arm in Home 1-4
5
Zones’ status
6
Remote Service menu (+ user code)
5
7
Partitions’ status (+ user code)
6
8
Pair to cloud menu (+ user code)
6
0
Display the service provider and the control panel’s version
*
Turn the chime on/off (toggle)
Keypad alarms
You can trigger 3 alarms at the keypad: Panic , Fire , and Medical . When these alarms are
triggered, FORCE activates the programmed responses, including triggering the sirens and
reporting the CMS (where relevant), and the contacts.
Alarm
Press & hold
Medical
4 + 6
Fire
7 + 9
Panic
* + #
2.1.5 Keypad settings
To view the Keypad Settings screen press and hold the menu key .
In this screen you can set the audio-visual parameters of the keypad,
which are Contrast , Brightness , Keys Backlight, and the Volume of the
buzzer. Each parameter is scaled 0-9. Settings are per keypad.
To change a parameter, do as follows:
1. Press an arrow key and select a parameter.
2. Enter a number between 0-9.
3. Press to save and exit.
5
Version 1.2 and higher
6
Version 1.3 and higher

Pima FORCE Series Specifications

General

Brand	Pima
Model	FORCE Series
Category	Security System
Language	English