What to do if my PION POWER Battery Charger shows an Adapter Overheat Warning?
If your PION POWER Battery Charger displays an Adapter Overheat Warning, first ensure the adapter is correctly plugged into the power outlet. If the outlet seems worn, try a different one. If the problem continues, please contact the Pion Power Customer Service Department.
What to do if I see an Overvoltage Warning on my PION POWER EFAC40NA11 Battery Charger?
If your PION POWER Battery Charger is showing an Overvoltage Warning, unplug the adapter from the outlet, and then plug it back in. If the problem persists, please contact the Pion Power Customer Service Department.
What to do if my PION POWER EFAC40NA11 Battery Charger displays an Overcurrent Warning?
If your PION POWER Battery Charger displays an Overcurrent Warning, unplug the charging handle from the vehicle, and then plug it back in. If the problem continues, please contact the Pion Power Customer Service Department.
What should I do if my PION POWER EFAC40NA11 Battery Charger shows a Power Leak Warning?
If your PION POWER Battery Charger displays a Power Leak Warning, unplug the charging handle from the vehicle, and then plug it back in. If the problem continues, please contact the Pion Power Customer Service Department.
What should I do if my PION POWER Battery Charger is showing an Adapter Ground Fault Warning?
If your PION POWER Battery Charger displays an Adapter Ground Fault Warning, unplug the adapter from the outlet, and then plug it back in. If the problem persists, please contact the Pion Power Customer Service Department.
What to do if my PION POWER EFAC40NA11 displays a Connecter Overheat Warning?
If you see a Connecter Overheat Warning on your PION POWER Battery Charger, allow the device to cool down; it should automatically resume charging. If the problem continues after cooling, please contact the Pion Power Customer Service Department.
General| Model | EFAC40NA11 |
|---|---|
| Category | Battery Charger |
| Input Voltage | 100-240V AC |
| Output Voltage | 12V DC |
| Output Current | 3.33A |
| Power | 40W |
| Efficiency | 85% |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 85°C |
| Weight | 200g |
| Input Frequency | 50-60Hz |
| Protection Features | Over Voltage Protection, Over Current Protection, Short Circuit Protection |
| Dimensions | 120mm x 60mm x 30mm |
To Next Page