To Next PageTo Next PageWhat to do if my PIONEER DJ Equipment is not recognized from the PC (LAN)?
If your PIONEER DJ Equipment isn't being recognized by your PC via LAN, the issue might be a defect in the LAN circuit to the MAIN CPU. Repair defective solder and defective connections if found. The MAIN CPU or LAN-HUB could also be defective, so confirm IC1801 (MAIN CPU), IC4001 (LAN-HUB) and the peripheral circuit of these parts and repair the defective soldering.
Why I cannot switch to the EUP mode on my PIONEER DJ Equipment?
If you cannot switch to the EUP mode on your PIONEER DJ Equipment, it might be because AUTO STANDBY is turned OFF. Change the setting as necessary. The PANEL CPU could also be defective, so replace IC7202 (PANEL CPU). There may be defective connectors, so repair any poorly connected connectors among SW POWER SUPPLY, MAIN Assy and PNLB Assy if found. The SW POWER SUPPLY could be defective, so replace SW POWER SUPPLY.
What to do if my PIONEER DJ Equipment does not return from the EUP mode?
If your PIONEER DJ Equipment isn't returning from EUP mode, it could be due to a defect in the button or switch. Confirm the status of that button or switch, and if there's no problem, replace the switch. The PANEL CPU could also be defective, so replace IC7202 (PANEL CPU). There may be defective connectors, so repair any poorly connected connectors among SW POWER SUPPLY, MAIN Assy and PNLB Assy if found. The SW POWER SUPPLY could be defective, so replace SW POWER SUPPLY.
Why is the monochromatic LED not turning on in my PIONEER DJ Equipment?
If a monochromatic LED on your PIONEER DJ Equipment isn't turning on, check for defective soldering and repair it if found. If the soldering is fine, the LED itself might be defective and need replacement. A defect in the lighting circuit is another possibility; if the signal is normal but the LED doesn't light up, replace the drive transistor. Finally, the PANEL CPU could be defective, so replace IC7202 (PANEL CPU) or IC7200/IC6002/IC6003 (Shift register).
What to do if the full-color LED does not turn on on my PIONEER DJ Equipment?
If a full-color LED on your PIONEER DJ Equipment isn't turning on, check for defective soldering and repair it if found. If the soldering is fine, the LED itself might be defective and need replacement. The PANEL CPU could also be defective, so replace IC7202 (PANEL CPU). Finally, the LED Driver IC might be defective, so replace PNLB Assy.
Why is the rotary encoder not working on my PIONEER DJ Equipment?
If the rotary encoder on your PIONEER DJ Equipment isn't working, it could be due to a defect in the rotary encoder circuit. Repair defective soldering and connections if found. The rotary encoder itself might be defective, so replace S6405 (Rotary Encoder). Finally, the PANEL CPU could be defective, so replace IC7202 (PANEL CPU).
General| Signal-to-Noise Ratio | 115 dB |
|---|---|
| Audio Formats | MP3, AAC, WAV, AIFF, FLAC, ALAC |
| Key Adjust | Yes |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Total Harmonic Distortion | 0.0018% |
| Weight | 5.5 kg |
| Display | 9-inch touchscreen LCD |
| Playable Media | USB, SD, Rekordbox |
| Type | Digital Multi Player |
| Jog Wheel Size | 206 mm |
| LAN | 1 (1000Base-T) |
| USB | USB (Type A) x 1, USB (Type B) x 1 |
| Audio Outputs | AUDIO OUT (RCA) x 1, DIGITAL OUT (Coaxial) x 1 |
| Effects | Beat Sync, Key Sync |
| Connectivity | LAN, USB |
| Outputs | RCA, Digital Coaxial |
Notes on soldering, replacing parts, and general service advice.
Notes on using lead-free solder and soldering iron control.
Parts difficult to replace as discrete components.
Caution on removing the Control panel section.
Confirm recommended checks after repair.
List of jigs and tools for service.
Diagram showing electrical connections between components.
Diagram showing signal flow between components.
Diagram showing power distribution and circuits.
Timing of signals during power-on.
Detailed troubleshooting guide for various issues.
Procedure for diagnosing JLCD Assy problems.
Circuit for monitoring power supply voltages.
List and meaning of error codes.
Method to confirm PC connection via USB.
Outline and usage of the service modes.
Procedure to calibrate the Jog LCD display.
List of main components and their functions.
Procedure for removing the fan motor assembly.
Procedures for disassembling the chassis and its components.
Procedures for disassembling the control panel components.
Procedures for disassembling LCD section components.
Procedures for disassembling JOG dial section components.
Adjusting positioning holes for gear installation.
Notes on JOG rotation speed calibration.
Essential checks and notes before and after repair.
Procedure for updating the product's firmware.
Method for writing the unit's serial number.
Procedure for adjusting JOG dial rotation load.
Procedure for adjusting the tempo slider zero point.
List of user-configurable settings.
Exploded view and parts list for the packing section.
Exploded view and parts list for the chassis section.
Exploded view and parts list for control panel.
Exploded view and parts list for control panel.
Exploded view and parts list for display section.
Exploded view and parts list for jog dial section.
