Pioneer A-102 User Manual

Operating instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Gebruiksaanwijzing
Bruksanvisning
Manual de instrucciones
Manual de instrucées
VY) PIONGER’
The Art of Entertainment
STEREO AMPLIFIER
AMPLIFICATEUR STEREO
STEREOVERSTARKER
AMPLIFICATORE STEREO
STEREO-VERSTERKER
STEREOFORSTARKARE
AMPLIFICADOR ESTEREOFONICO
AMPLIFICADOR ESTEREO
The illistration shows model A-202.
L’illustration montre le modéle A-202.
Die Abbilidung zeigt Modell A-202.
Il modello nellillustrazione él’A-202.
De afbeelding toont model A-202.
Pa bildeln visas modell A-202.
La ilustraci6n muestra el modelo A-202.
Esta ilustracao mostra o modelo A-202.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT
RISK OF ELECTRIC SHOCK
CAUTION
The lightning flash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated ‘‘dangerous voltage’’ within the product's
enclosure that may be of sufficient magnitude to constitute
a tisk of electric shock to persons.
olen eamelaay
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intendéd to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Pioneer A-102 Specifications

General

Input Sensitivity (line)	150 mV
Signal-to-Noise Ratio (line)	90 dB
Input Sensitivity (Phono)	2.5 mV
Speaker load impedance	4 - 16 ohms
Power Output	30W per channel (8 ohms, 20Hz-20kHz)
Frequency Response	20 Hz - 20 kHz
Total Harmonic Distortion	0.05%
Dimensions	420 x 130 x 360 mm
Output	150mV (Rec Out)

Summary

Features

Installation

Location

Guidance on where to place the amplifier to avoid damage or malfunction.

Power Cord Caution

Safety instructions for handling the power cord to prevent electrical hazards.

Maintenance of External Surfaces

Instructions for cleaning the unit's exterior surfaces.

Operations

Before Beginning Operations

Initial setup steps and control adjustments before operating the unit.

Playback Procedures

Instructions on how to select a source and play back audio.

Recording Tapes

Steps for selecting a source and recording audio onto tapes.

Copying Tapes

Guidance on how to copy audio from one tape or deck to another.

Using Two Cassette Decks for Copying

Detailed steps for copying tapes when using two cassette decks.

Connecting Components to TAPE 2/ADPT Terminals

How to connect and use adaptor components or cassette decks to TAPE 2/ADPT terminals.

Specifications

Amplifier Section Specifications

Technical details on power output, distortion, and dynamic range for the amplifier.

Input/Output and Frequency Specifications

Details on input/output levels, impedance, and frequency response.

Tone Control and Power Information

Specifications for tone controls, loudness, and power supply details.

Connections

Connecting Speaker Cords

Instructions for connecting speaker cables to the amplifier terminals.

Connecting Input/Output Cords

Instructions for connecting audio input and output cables to the unit.