Need help?Do you have a question about the Pioneer A-400X and is the answer not in the manual?
Connection diagram for the Power Switch Assembly (AWZ4964).
Connection diagram for the Diode Assembly (AWZ4963).
Connection diagram for the LED Assembly (AWZ4966).
Connection diagrams for AF Complex Assembly (AWZ4961, AWZ4962).
Procedure for adjusting idle current using VR201 and VR202 for Lch and Rch.
Details on the power button's operation and the unit's indicator light.
Guidance on using the REC SELECTOR for recording from various sources.
Instructions for selecting the audio input source via the INPUT SELECTOR.
How to select playback from Tape 1/DAT or Tape 2 decks.
Adjusting the volume level and independent channel balance.
Setting the PHONO SELECTOR based on MM or MC cartridge type.
Connection diagram for the Power Switch Assembly (AWZ4964).
Connection diagram for the Diode Assembly (AWZ4963).
Connection diagram for the LED Assembly (AWZ4966).
Connection diagrams for AF Complex Assembly (AWZ4961, AWZ4962).
Procedure for adjusting idle current using VR201 and VR202 for Lch and Rch.
Details on the power button's operation and the unit's indicator light.
Guidance on using the REC SELECTOR for recording from various sources.
Instructions for selecting the audio input source via the INPUT SELECTOR.
How to select playback from Tape 1/DAT or Tape 2 decks.
Adjusting the volume level and independent channel balance.
Setting the PHONO SELECTOR based on MM or MC cartridge type.
General| Input Sensitivity (MM) | 2.5 mV |
|---|---|
| Input Sensitivity (line) | 150 mV |
| Signal to Noise Ratio (MC) | 74dB |
| Output (line) | 150 mV |
| Frequency Response | 5Hz to 100kHz |
| Total Harmonic Distortion | 0.008% |
| Input Impedance | 47 k ohm (MM), 100 ohm (MC) |
To Next Page
