Do you have a question about the Pioneer A-445 and is the answer not in the manual?
Power Output | 60 watts per channel into 8Ω (stereo) |
---|---|
Input sensitivity | 150mV (line) |
Total Harmonic Distortion (THD) | 0.08% |
Frequency Response | 5Hz to 100kHz |
Signal-to-Noise Ratio | 100 dB (A-weighted) |
Input Impedance | 47k ohms |
Alerts user to dangerous voltage within product enclosure, a risk of electric shock.
Warns against removing cover to prevent electric shock; refers servicing to qualified personnel.
Controls unit power ON/OFF; indicator lights when power is ON.
Selects speaker systems A or B for listening; ON for sound, OFF for no sound.
Selects playback source from various connected components.
Adjusts the playback volume level.
Bypasses tone controls for pure sound reproduction.
Adjusts low and high frequency tones; center position is flat.
Boosts low/high frequencies for playback at low volume levels.
Cuts frequencies below 17 Hz to eliminate super-low noise.
Adjusts sound balance between left and right speakers.
Instructions for stripping wire, inserting into terminals, and tightening.
Guidelines for connecting audio cables with red/white plugs.
Procedure for connecting components like equalizers to adaptor terminals.
Steps for selecting playback source and operating playback equipment.
Instructions for selecting recording equipment and starting recording.
How to hear sound concurrently while recording on a 3-head tape deck.
Procedure for copying audio from one tape deck to another.
Diagnoses and remedies for unit not receiving power.
Troubleshooting steps for when no sound is heard from the unit.
Identifies causes and solutions for sound only in one speaker.
Addresses problems with recording and tape copying functions.
Details power output, distortion, sensitivity, and frequency response.
Provides specifications for tone controls, loudness, filters, and S/N ratios.
Lists power requirements, consumption, dimensions, and weight.
Guidance on cleaning the unit's exterior surfaces safely.