Pioneer AVIC-8000NEX User Manual (English)

To Next Page

System Firmware Update Instructions for AVIC-8000NEX

IMPORTANT

Please download and print these firmware update instructions before downloading and installing the

firmware update. It is important that you complete all steps correctly and in the order described below.

In order to perform this update, you will need a blank USB storage device or SD card, 2 GB or larger in

capacity, formatted to FAT32.

IMPORTANT (For navigation system users)

• Once you install this firmware, all navigation function settings will be reset to factory default. Once

the update has finished, you will need to reconfigure these settings.

CAUTION

• The only USB port that supports the firmware update is USB port 1.

• DO NOT turn your unit off, eject the SD memory card or disconnect the USB storage device while

the firmware is being updated.

• You can only update the firmware when the vehicle is stopped and the parking brake is engaged.

Displaying the firmware version

Check whether the firmware of your unit needs to be updated by checking the version number of the

firmware.

Procedure:

1. Press the HOME button to display the Top menu screen.

2. Touch the following keys in the following order.

The “System” screen appears

3. Scroll down the list.

Other manuals for Pioneer AVIC-8000NEX

Need help?

Do you have a question about the Pioneer AVIC-8000NEX and is the answer not in the manual?

General