Connecting the system
13 cm
USB and mini-jack
connector
(
*
2)
— When connecting your iPod, both connections are necessary.
— You must set “AV1 Input” in “AV System Settings” to “iPod” when
connecting the iPod. (For details, refer to Operation Manual.)
(
*
2)
Aerial
jack
RDS-TMC tuner
Vehicle
aerial
2 m
30 cm
The navigation unit
1 m
(
*
1)
Connect either the
USB interface cable
for iPod or an
appropriate USB
storage device.
(
*
1)
Wired remote input
Please refer to the instruction
manual for the Hard-wired remote
control adapter (sold separately).
Vehicle Bus adapter input
Please refer to the instruction
manual for the Vehicle Bus
adapter (sold separately).
Engb
8
Section
02
Connecting the system
To Next Page
Loading...
