User's manual AVIC-S1
Traffic Messages - 83 -
The TRAFFIC window opens.
7.2 Search for traffic station
Overview AVIC-S1 can automatically set the transmitter with the strongest
reception. You can however also search for a specific transmitter.
Search for
transmitter
1. Open the T
RAFFIC window. (refer to page 82)
2. In the T
RAFFIC window, tap on the Traffic Station button.
The T
RAFFIC STATION window opens.
The current traffic station and its frequency is shown.
On the Tune Automatically button in the right bottom corner of
window you can see if the transmitter search is being performed
automatically (On) or not (Off).
If the transmitter search is currently being performed
automatically, then the To the right and To the left buttons are
deactivated.
To Next Page
Loading...
