System Firmware Update Instructions For CDJ-900
NOTE1: If you have any difficulty carrying out these instructions, please contact Pioneer
Customer Support Center.
NOTE 2: Once upgraded to this version, it is not possible to downgrade to a lower version.
A. Check the current firmware version of the player:
1. Turn on the power of the CDJ-900.
2. Press [MENU/UTILITY] for over 1 second. Next the [UTILITY] screen is displayed.
3. Scroll the screen menu with the rotary selector, firmware VERSION No. will be
displayed.
4. Press [MENU/UTILITY] to return to the menu screen.
If the version number is 4.10 or higher, it is not necessary to update the firmware.
If the version number is less than 4.10, it is necessary to update the firmware. Please continue
to Step B.
B. Download the firmware ZIP file from Pioneer's website:
Download the file named "CDJ-900v410.zip" from the website to a folder on your computer.
C. Create the System Firmware Update USB memory device:
USB memory device requirements:
- USB specification 2.0
- 32 MB or more in capacity
- Should be blank and formatted in FAT or FAT32 (mass storage class)
PROCEDURE:
1. Connect the USB memory device to your computer.
2. Double click the ZIP file named "CDJ-900v410.zip" to open it.
3. Extract and save all files to the root directory of your USB memory device
4. Confirm the file names and the file size is correct on the USB memory device. To check
the file size in Microsoft Windows, select the file, press the right mouse button, and
select "Properties". If the file name and size do not match the ones listed below, perform
steps B and C again.
C900DRIV.UPD (388.690 bytes)
C900GUI.UPD (277.654 bytes)
C900MAIN.UPD (5.987.598 bytes)
C900PANL.UPD (91.526 bytes)
To Next Page
Need help?
General
Weight and Dimensions
