Need help?Do you have a question about the Pioneer serato DJ Pro DJ PLX-CRSS12 and is the answer not in the manual?
General| Weight | 12.8 kg / 28.2 lbs |
|---|---|
| Drive Method | Direct drive |
| Braking System | Electronic brake |
| Effective Arm Length | 230 mm |
| Overhang | 15 mm |
| Stylus Pressure Range | 0-4 g |
| Serato DJ Pro Compatibility | Yes |
| MIDI Control | Yes |
| Platter | Die-cast aluminum |
| Pitch Control | +/-8, +/-16, +/-50 % |
| Connectivity | RCA, USB |
| Turntable Speeds | 33 1/3, 45 rpm |
| Start Time | 0.3 sec (at 33 1/3 rpm) |
| Tonearm Type | Static balance S-shaped tonearm |
| Terminals | RCA (L/R) |
| DVS Control | Yes |
| Speeds | 33 1/3, 45 rpm |
| Startup Time | 0.3 sec (at 33 ⅓ rpm) |
| Cartridge | No |
| Outputs | RCA (L/R), USB |
| USB | Yes |
| Dimensions (Alternate) | 453 mm (W) × 159 mm (H) × 353 mm (D) |
| Included Accessories | USB cable, RCA cable, power cable |
Explains Serato DJ Pro requirements and compatibility for the PLX-CRSS12 accessory.
Details the necessary steps to connect the PLX-CRSS12 to Serato DJ Pro.
Identifies and describes the functions of the PLX-CRSS12's top panel controls.
Lists and explains the available connections on the rear of the PLX-CRSS12 unit.
Explains triggering/setting Cue points and using loop rolls with performance pads.
Details controlling Stems features and Pad FX via the performance pads.
Covers triggering samples, saving loops, and reloping saved loops with pads.
Describes loading scratch samples to decks via the performance pads.
Explains remapping Serato DJ Pro functions to the accessory via MIDI.
Guides on enabling tooltips, watching tutorials, and accessing support.
To Next Page