Need help?Do you have a question about the Pioneer DDJ-SR2 and is the answer not in the manual?
General| Bundled software | Serato dj, Serato Pitch ‘n Time DJ |
|---|---|
| Minimum RAM | 4 GB |
| Mac compatibility | Yes |
| Minimum processor speed | 1.07 GHz |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8.1 |
| Sample rate | 44.1 kHz |
| Product color | Black |
| Frequency range | 20 - 20000 Hz |
| USB direct playback | - |
| Built-in optical drive | No |
| Number of mixer channels | 2 channels |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| Master (XLR) out | 2 |
| USB connector type | USB Type-B |
| Headphone connectivity | 3.5 mm/6.35 mm |
| Microphone connectivity | 6.3 mm |
| Number of microphone inputs | 1 |
| Input voltage | 12 V |
| Power supply type | DC |
| Cable lock slot type | Kensington |
Weight and Dimensions| Depth | 334.5 mm |
|---|---|
| Width | 553 mm |
| Height | 65.1 mm |
| Weight | 3700 g |
Describes the unit's dedicated controller features for intuitive operation of Serato DJ software.
Explains how the unit supports Serato DJ software, including preset buttons for immediate use.
Details the large jog dial and its indicator for intuitive control and performance state feedback.
Information on the bundled Pitch 'n Time DJ expansion pack for time stretch and key control.
Describes the multi-color pads used for functions like HOT CUE, ROLL, and SAMPLER.
Explains dedicated interfaces for KEY SHIFT and KEY SYNC for track arrangement and mixing.
Highlights the high-class feel provided by the aluminum top panel and jog plate.
Discusses the low-jitter clock and high-performance DAC for faithful sound reproduction.
Details the multiple input and output terminals supporting various DJ styles and PA devices.
Explains the needle search function for intuitive and speedy point search by touching the pad.
Instructions on obtaining the latest Serato DJ software and preparing for installation.
Explains the need for dedicated driver software for audio output and how to obtain it.
Step-by-step guide to downloading Serato DJ software from the official website.
Provides instructions on connecting power, speakers, and other components to the unit.
Details the names and functions of the rear panel components of the DJ controller.
Information on connecting headphones to the unit's 1/4" TRS and 3.5mm mini jack inputs.
Describes the control for adjusting the headphone output volume.
Adjusts the level of sound output from the [MIC] channel.
Details the controls for browsing tracks and managing the library within Serato DJ.
Explains the buttons and controls for operating the four decks of the controller.
Details the controls for mixing audio channels, including EQ, faders, and crossfader.
Describes the controls for applying and adjusting audio effects within Serato DJ.
Explains the operation of the jog dial for scratching, pitch bending, and skip mode.
Details the needle search pad for jumping to specific positions within a track.
Explains the function of the slip and vinyl mode buttons for enhanced performance.
Describes how to adjust the track playing speed using the tempo slider.
Explains the key lock function to maintain pitch while changing tempo.
Details the key sync function to automatically match track keys for harmonic mixing.
Describes how to raise and lower the track key using the key shift buttons.
Explains how to reset the key to the original track key.
Details the auto loop function for creating loops automatically.
Explains how to double the loop playback length or shift the loop.
Explains how to halve the loop playback length or shift the loop.
Details setting the loop out point and canceling loop playback.
Explains setting the loop-in point and switching loop slots.
Describes how to adjust various parameters for performance pads and effects.
Sets hot cue mode and allows saving/clearing hot cue points.
Sets roll mode for loop playback based on pad presses.
Sets slicer mode to divide tracks into sections for looped playback.
Sets the sampler mode for playing loaded samples.
Explains the use of performance pads for various DJ performances.
Controls track playback, pausing, and stutter playback.
Sets, plays, and calls out temporary cue points for track navigation.
Synchronizes tempos and beat grids of multiple decks automatically.
Used in combination with other buttons to access secondary functions.
Allows sliding the overall beat grid left or right.
Enables adjustment of the beat grid interval and setting beat markers.
Provides reverse playback and cancels standby mode.
Switches the panel display within the Serato DJ software.
Selects the input source for each channel from connected devices or Serato DJ.
Adjusts the input level of sound for each channel.
Boosts or cuts frequencies for the different channels.
Applies a filter effect to the audio channels.
Outputs channel sound to headphones for monitoring and cueing.
Adjusts the level of sound output from each channel.
Outputs sound assigned by the crossfader assign switch.
Adjusts the level of sound output for the master channel.
Adjusts the level of sound output from the [BOOTH] terminal.
Balances monitor volume between cued channels and master channel.
Adjusts the sound level of the sampler.
Displays the sound level of each channel before it passes through the channel faders.
Displays the level of sound output for the master channel.
Adjusts the effects' parameters for FX1 and FX2 units.
Adjusts the effect time based on beats.
Turns effects on/off or switches effect types.
Assigns effect unit FX1 on/off to the respective channel.
Assigns effect unit FX2 on/off to the respective channel.
Information on connecting headphones to the unit's 1/4" TRS and 3.5mm mini jack inputs.
Describes the control for adjusting the headphone output volume.
Adjusts the level of sound output from the [MIC] channel.
Explains the deck selection, vinyl, and track color indications on the jog dial.
Step-by-step guide for connecting headphones, speakers, and the computer to the unit.
Instructions on how to properly close the software and turn off the unit.
Guides on how to launch Serato DJ software on Windows and Mac operating systems.
Describes the initial screen displayed after launching Serato DJ.
Details the screen layout when tracks are loaded into Serato DJ.
Explains the procedure for importing tracks into the Serato DJ library using folders.
Steps for loading selected tracks onto a deck and starting playback.
Procedure for playing tracks and outputting sound to speakers and headphones.
Guides on setting up and adjusting headphone monitoring.
Instructions on how to properly close the software and turn off the unit.
Explains functions activated by performance pad mode buttons like HOT CUE, ROLL, SLICER.
Details how to set and use hot cue points for instantaneous track playback.
Describes loop playback based on pad presses for rhythmic performances.
Explains dividing tracks into sections for looped playback using the slicer.
How sliced sections are assigned to pads and how playback advances.
Describes how playback returns to the beginning of sliced sections in loop mode.
Explains how to play tracks loaded in sampler slots using performance pads.
Describes saving loops in Serato DJ or calling up saved loops.
Explains how to use pitch play mode, requiring Pitch 'n Time DJ activation.
Details cutting sound according to beat timing using pads and channel fader.
Explains slip mode for uninterrupted playback during scratching or looping.
Describes how to perform scratching while maintaining normal playback.
Combines slip mode with hot cues for seamless playback.
Explains slip mode for stopping tracks slowly while maintaining background playback.
Describes auto loop playback in slip mode without interruption.
Explains creating loops and performing slip looping manually.
Details how to use channel fader start and crossfader start functions.
Explains track analysis for BPM and waveform display in Serato DJ.
Details how to operate FX1 and FX2 units for applying effects to decks or master output.
Illustrates the display of effect types, parameters, and assignment on Serato DJ.
Guides on setting and operating in multi FX mode for applying multiple effects.
Details setting and operating in single FX mode for adjustable parameters.
Explains how to switch between auto tempo mode and manual tempo mode for effects.
Selects the input source for each channel from connected devices or Serato DJ.
Adjusts the input level of sound for each channel.
Boosts or cuts frequencies for the different channels.
Applies a filter effect to the audio channels.
Adjusts the level of sound output for the master channel.
Adjusts the level of sound output from the [BOOTH] terminal.
Balances monitor volume between cued channels and master channel.
Adjusts the sound level of the sampler.
Outputs channel sound to headphones for monitoring and cueing.
Adjusts the level of sound output from each channel.
Displays the sound level of each channel before it passes through the channel faders.
Displays the level of sound output for the master channel.
Outputs sound assigned by the crossfader assign switch.
Steps to launch the unit's utilities mode for changing various settings.
Lists the various settings that can be changed within the utilities mode.
Explains how to use the unit as a general MIDI controller regardless of Serato DJ.
Details how to change the fader start setting, including sync mode options.
Explains how to adjust the master output attenuator level.
Describes how to change the flashing behavior of buttons during slip mode.
Explains how to change or disable the demo mode feature.
Explains how to adjust the buffer size for optimal performance with ASIO drivers.
Guides on how to check the installed driver and firmware versions.
Instructions on how to access the setting utility for Windows and Mac.
Provides solutions for common problems encountered with the unit and software.
Steps to download the official Serato DJ software manual from the Pioneer DJ support site.
Explains how to use the unit with DJ software other than Serato DJ via MIDI.
Information on acquiring the list of MIDI messages supported by the unit.
Details the requirement for dedicated driver software for audio output.
Lists the supported operating systems for the unit and its software.
Directs users to the Pioneer DJ support site for the latest driver software information.
Presents the terms and conditions for using the Pioneer DJ software.
To Next Page
