To Next PageTo Next Page
Need help?Do you have a question about the Pioneer DDJ-SX2 and is the answer not in the manual?
General| MIDI | 24 bit |
|---|---|
| Sample rate | 44.1 kHz |
| Mixer section | Yes |
| Product color | Black |
| Scratcher type | Digital Vinyl System (DVS) scratcher |
| Frequency range | 20 - 20000 Hz |
| Number of controls | 8 |
| USB direct playback | - |
| Built-in optical drive | No |
| Number of mixer channels | 4 channels |
| Number of dedicated effects controls | 18 |
| Total Harmonic Distortion plus Noise (THD+N) | 0.003 % |
| Total Harmonic Distortion plus Noise (THD+N) (out, unbalanced, L, R) | 0.005 % |
| Audio (L/R) in | 2 |
| USB connector type | USB Type-B |
| USB ports quantity | 1 |
| Apple docking compatibility | Not supported |
| Input voltage | 110 - 240 V |
| Power supply type | AC |
| Minimum RAM | 2 GB |
| Minimum processor speed | 2 GHz |
| Minimum storage drive space | 5000 MB |
| Mac operating systems supported | Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Windows operating systems supported | Windows 7 Ultimate, Windows 8.1 |
| Minimum display resolution requirement | 1280 x 720 pixels |
Weight and Dimensions| Depth | 353.4 mm |
|---|---|
| Width | 664 mm |
| Height | 70.4 mm |
| Weight | 5800 g |
Provides an overview of the unit's key features and design elements.
Lists all items included with the DJ controller package.
Details safety instructions, mounting, and removal procedures for the AC adapter and power plug.
Guides users through downloading and installing Serato DJ and its associated driver software.
Lists the minimum operating environment specifications for Serato DJ.
Explains how to use the ASIO settings utility for optimizing audio performance on Windows.
Provides instructions for connecting various audio and computer devices to the unit.
Identifies and describes the functions of all terminals on the rear panel.
Identifies and describes the functions of all controls on the front panel.
Illustrates how to connect external input devices like microphones and DJ players.
Illustrates how to connect speakers and other output devices to the unit.
Explains the functions of controls in the browser section for track management.
Provides step-by-step instructions for connecting the unit, computer, and audio devices.
Guides on how to launch the Serato DJ software on different operating systems.
Shows the Serato DJ software interface and explains its main sections.
Explains the typical procedure for importing music tracks into the Serato DJ library.
Details the process of loading tracks, playing them, and setting audio output levels.
Provides instructions on how to properly quit Serato DJ and turn off the unit.
Explains how to record and play back hot cue sequences using Serato Flip.
Details the usage of performance pads in Hot Cue, Roll, and Slicer modes.
How to set, save, and trigger hot cue points on the performance pads.
Explains how to create and manipulate loop rolls using the performance pads.
Details how to use the slicer function to loop specific sections of a track.
Describes the differences between slicer mode and slicer loop mode.
Explains how to load tracks into sampler slots and play them with performance pads.
Details how to create cue loops and save/recall loops using the performance pads.
Covers slip scratching, slip braking, auto slip looping, and manual slip looping.
Explains how to control two decks simultaneously for advanced mixing.
Lists functions that are restricted when operating in dual deck mode.
Explains how to use channel fader start and crossfader start functions.
Details how the velocity sampler mode works and how to turn it off.
Explains how tracks are analyzed by Serato DJ for BPM and waveform display.
Guides on how to apply effects using the FX1 and FX2 units.
Explains how to operate the unit in multi FX mode for complex effect combinations.
Guides on how to operate the unit in single FX mode for individual effect control.
Explains how to switch between auto tempo and manual tempo modes for effects.
Provides instructions on using Serato DJ's recording functions.
Explains how to use the DVS function with compatible DJ players or turntables.
Guides on connecting and mixing external audio sources like microphones and DJ players.
How to connect and mix microphone audio through the unit.
How to connect and mix audio from DJ players or line-level devices.
How to connect and mix audio from analog turntables.
Steps to enter the unit's utility mode for settings adjustment.
Lists various settings that can be customized in utility mode.
Configures the channel fader start function behavior regarding sync mode.
Configures the crossfader start function behavior regarding sync mode.
Sets the master output level adjustment.
Controls the flashing behavior of buttons when slip mode is active.
Sets the inactivity timer before demo mode is activated.
Allows selection of one of four velocity curves for sampler pads.
Enables or disables the after-touch sensitivity for sampler volume.
Restricts or enables operation of the Needle Search pad.
Adjusts the touch sensor sensitivity for the jog dials.
Disables or enables the low cut filter for microphone sound input.
Sets the illumination mode for the jog dial's red and white areas.
Selects the length for the backspin operation.
Provides checks and remedies for common problems encountered with the unit and software.
Provides checks and remedies for common problems encountered with the unit and software.
Covers technical diagrams, software acquisition, and usage with other DJ software.
Illustrates the audio signal flow within the unit.
Guides on acquiring the Serato DJ software manual and other related information.
Explains how to use the unit as a MIDI controller for different DJ software.
