To Next PageTo Next Page
Need help?Do you have a question about the Pioneer DDJ-SB2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Pad Trans Effect | Yes |
| Filter Fade | Yes |
| USB Bus Powered | Yes |
| Software | Serato DJ Intro |
| Weight | 2.1 kg |
| Deck Control | 2 |
| Trim knob | Yes |
| Sampler | Yes |
| Manual Loop | Yes |
| Autoloop | Yes |
| Inputs | 1 MIC (1/4 inch Jack) |
| USB | 1 USB B port |
| Type | DJ Controller |
| MIDI | Yes |
| Crossfader | Yes |
| Filters | Yes |
| Effects | Yes |
| Performance Pads | 8 |
| Dimensions | 487 x 271.2 x 58.5 mm |
| EQ/ISO | 3-band EQ |
| Hot Cues | 4 |
| Outputs | 1 Master (RCA) |
| Frequency Range | 20 Hz - 20 kHz |
| Power Consumption | 500 mA |
| Compatibility | Serato DJ Intro |
| EQ | 3-band EQ |
| Jog Wheels | Yes, 128 mm aluminum jog wheels |
Details the DDJ-SB2's design, jog dials, performance pads, and key functions like FILTER FADE and TRANS.
Explains compatibility with Serato DJ Intro software and the unit's built-in audio interface.
Covers USB bus power, high sound quality, and the items included in the box.
Details the Serato DJ Intro software and its minimum operating environment.
Step-by-step guides for installing Serato DJ Intro on Windows and Mac OS X.
Information about the dedicated ASIO driver for Windows, including utility software.
Details how to connect headphones, speakers, and the computer via USB.
Identifies terminals and controls on the rear panel and main unit.
Explains the controls within the Browser, Deck, Mixer, and Effect sections.
Steps for connecting headphones, speakers, and the computer, then powering on.
Guide to launching the Serato DJ Intro software on different operating systems.
Explanation of the software's layout, including deck and waveform displays.
Procedure for importing music files into the Serato DJ Intro library.
Steps for selecting, loading, and playing tracks from the library.
Instructions for playing tracks, adjusting volumes, and headphone monitoring.
Steps for safely closing Serato DJ Intro and disconnecting the unit.
Details the functions of pads for hot cue, auto loop, manual loop, and sampler.
Explains how to use and control Serato DJ Intro's effects, including simultaneous operation.
Describes filter fade for mixing and pad trans for beat-synced cutting.
Explains track analysis and how to mix microphone sound.
How to access and change settings like fader start, demo mode, and jog dial interval.
Guidance on resolving problems with power, recognition, sound, and software operation.
Instructions for downloading the latest operating instructions and Serato DJ Intro manual.
Covers license agreements, export controls, trademarks, and copyright cautions.
