Need help?Do you have a question about the Pioneer DJM-750 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Frequency Range | 20 Hz - 20 kHz |
| Sampling Rate | 96 kHz |
| A/D Converter | 24-bit |
| D/A Converter | 24-bit |
| USB Ports | 1 x USB-B |
| EQ | 3-band |
| Effects | Sound Color FX, Beat FX |
| Sound Color FX | Filter, Crush, Noise |
| Beat FX | Delay, Echo, Reverb, Pitch, Roll, Spiral |
| Outputs | 2 x MASTER (XLR, RCA), 1 x BOOTH (RCA) |
| Power Supply | AC 100-240 V, 50/60 Hz |
Overview of the DJ mixer's key functions and technology.
Diagram and explanation of the mixer's rear panel connection terminals.
Instructions for connecting audio sources to the mixer's input terminals.
Instructions for connecting the mixer's output terminals to speakers or other devices.
Guide for connecting microphones, headphones, and computers to the mixer's control panel.
Information on installing and using the necessary driver and setting utility software.
Precautions and step-by-step guide for installing the driver software.
Instructions for connecting the mixer to a computer using a USB cable.
Overview of the functions and settings available in the utility software.
Configuring audio data output from the mixer to the computer via the utility.
Guide to adjusting buffer size for ASIO audio performance in Windows.
How to check the installed version of the driver software using the utility.
Information on how to find the latest driver software and compatibility details.
Detailed explanation of the mixer's controls from MIC LEVEL to MASTER.
Detailed explanation of the mixer's controls from EQ CURVE to ON/OFF buttons.
Steps for configuring and outputting sound from the mixer.
How to adjust the sound quality using EQ and other controls.
Instructions for monitoring audio signals through headphones.
How to change the curve characteristics for channel and crossfaders.
Using faders to start playback on connected DJ players.
Using the crossfader to initiate playback on connected DJ players.
Connecting and operating a microphone with the DJ mixer.
Switching audio output between monaural and stereo modes.
How to adjust the left/right balance of the audio output.
Adjusting the audio signal level output from the BOOTH terminal.
How to use and apply the SOUND COLOR FX effects with the mixer.
How to use and apply the BOOST COLOR FX effects with the mixer.
Using the BEAT EFFECT function to apply tempo-synced effects.
Connecting and using an external effector with the mixer via SEND/RETURN.
Using the mixer's MIDI function to control DJ software.
How to send MIDI start and stop messages for synchronization.
Detailed description of the BOOST COLOR FX and SOUND COLOR FX effect types.
Explanation of the different types of BEAT EFFECT available on the mixer.
Detailed explanation of the SPIRAL and FILTER effect functions.
Detailed explanation of the REVERB and FLANGER effect functions.
Detailed explanation of TRANS, ROBOT, and VINYL BRAKE effect functions.
Detailed explanation of the SLIP ROLL and ROLL effect functions.
Details on using the SEND/RETURN terminals for external effects.
Detailed list of MIDI messages for effects, controls, and fader start.
Explanation and configuration of the auto standby function.
Explanation of the two modes for the talk over function.
Overview of user-configurable settings and preferences.
Solutions for common problems related to sound output and effect monitoring.
To Next Page
