To Next PageTo Next Page
Need help?Do you have a question about the Pioneer DV-464-S and is the answer not in the manual?
General| Type | DVD Player |
|---|---|
| Video D/A Converter | 10-bit / 27 MHz |
| Output Video | Composite, S-Video, Component |
| Progressive Scan | Yes |
| Remote Control | Yes |
| Disc Formats | DVD-Video, DVD-R, DVD-RW, CD, CD-R, CD-RW |
| Audio Formats Supported | Dolby Digital, DTS |
| Audio Output | Coaxial |
| Output Resolution | 480p, 576p |
| Audio DAC | 24-bit |
| Audio D/A Converter | 192 kHz / 24-bit |
Details laser power output and wavelength for DVD and CD diodes.
Information on checking product labels for safety warnings and compliance.
Provides detailed cautions on laser interlock mechanism and beam exposure.
Details system, power requirements, weight, dimensions, and operating conditions.
Explains the 21-pin AV connector assignment and signal provision.
Provides technical specifications for digital audio output, including frequency response.
Lists all accessories included with the product, such as cables and remote.
Illustrates the packing procedure and components for different model types.
Lists specific part numbers for items included in the product packaging.
Details differences in parts and accessories between various DV-464 models.
Provides a list of part numbers for the exterior components of the unit.
Details part differences for exterior components across various DV-464 models.
Lists part numbers for the components found on the front panel of the unit.
Details part differences for front panel components across various DV-464 models.
Illustrates specific points for applying lubricant to mechanical parts for proper operation.
Lists part numbers for components of the Traverse Mecha. Assy-S.
Provides a block diagram illustrating the functions of the Front End IC (IC301).
Provides a block diagram illustrating the functions of the Back End IC (IC601).
Details the audio and video processing blocks within the DVDM Assy.
Details the component layout and connector pinouts for the LOAB Assy PCB.
Details the component layout and connector pinouts for the DVDM Assy PCB (Side A).
Details the component layout and connector pinouts for the DVDM Assy PCB (Side B).
Lists major assemblies like Loading Mecha, LOAB, DVDM, FLKY, PWSB, Power Supply, and SCRB with their part numbers.
Provides a list of semiconductor components (ICs, transistors) with their part numbers.
Lists capacitor and resistor components with their part numbers and specifications.
Lists parts specific to the FLKY and PWSB Assy modules.
Details the necessary adjustment items for mechanism and electrical parts, and their locations.
Lists the specialized tools and measuring instruments needed for product adjustments.
Specifies when to perform adjustments based on part replacement.
Specifies mechanical and electrical adjustment points required after replacing key components.
Instructions on how to activate the test mode using the remote control unit.
Describes the procedure for setting a disc for testing within the test mode.
Details how to play discs within the test mode, including address playback.
Instructions on how to properly exit the test mode and return the unit to normal operation.
Step-by-step guide for performing coarse adjustment of tangential and radial height.
Covers test mode activation, display specifications, and functional details.
Details shortcut key functions, model info display, and service mode operations.
Covers EDC/ID error display, self-diagnosis, and mechanical error history.
Explains error history format, codes, servo states, and error message descriptions.
Provides lists of error codes, their causes, and troubleshooting steps.
Details specific error categories like Focus, Tracking, Stepping, Spindle, Acquisition, Decoder, and Device errors.
Guides on inputting, confirming, and managing player ID numbers and data.
Instructions for entering and writing ID data from a disc to the player.
Steps for removing the bonnet, tray, front panel, and DVDM Assy.
Guides for removing the Loading, Traverse, and Pickup mechanism assemblies.
Details on handling screws and arranging flexible cables during disassembly and reassembly.
Lists integrated circuits and provides a block diagram for the Front End IC.
Details the pin functions for the IC301 Front End IC across multiple pages.
Details the pin functions for the IC601 Back End IC across multiple pages.
Covers pin arrangement, block diagram, and pin functions for IC101.
Covers general disc compatibility, CD-R/RW, DVD-R/RW, PC-created, and compressed audio formats.
Details compatibility for WMA and JPEG file formats, including naming conventions.
Instructions for cleaning pickup lenses using specified cleaning liquid and paper.
Describes the function of the power, disc tray, and open/close buttons.
Explains the function of the pause, play, and stop buttons for playback control.
Covers the display panel and buttons for fast scanning and chapter/track skipping.
Explains the RW mark indicating compatibility with DVD-RW discs in Video Recording mode.
Explains analog and digital audio outputs for connecting to audio systems.
Describes standard video and S-video outputs for connecting to displays.
Details the AV connector (SCART) and digital audio connections.
Explains how to connect the supplied power cable to the AC input.
Indicates playback status like playing, paused, time remaining, and repeat modes.
Shows indicators for chapter, title, track numbers, and disc type.
Lights up to show when Dolby Digital or DTS soundtracks are playing.
Covers the power button and basic controls like audio and subtitle selection.
Explains buttons for navigating menus, accessing the top menu, and home menu.
Details buttons for playback control, number input, and search functions.
Covers surround sound activation and camera angle selection.
Explains buttons for tray operation, clearing input, and selecting menu options.
Details buttons for accessing menus, returning to previous screens, and chapter/track navigation.
Covers buttons for displaying disc information and changing zoom level.
