Why is timer recording not working on my Pioneer DVR-RT501-S DVD Recorder?
If your Pioneer DVD Recorder is not performing timer recording, ensure that the time is set correctly. Also, verify that the recording start and end times are set correctly. Finally, confirm that the TIMER REC button has been pressed (indicated by the light being on).
Why is my Pioneer DVR-RT501-S TV recording not working?
If your Pioneer DVD Recorder is not recording TV, check if the erase prevention tab on the video cassette is broken off. Also, ensure that the unit is not in the external input mode.
What to do if my Pioneer DVR-RT501-S DVD Recorder has no function in DVD mode?
If your Pioneer DVD Recorder doesn't function in DVD mode, the unit may have stopped working due to a soiled or damaged disc, or another unforeseen issue. Try resetting the unit by holding down the STANDBY/ON button for 10 seconds or longer. Note that the unit may also automatically reset itself if it detects a problem.
What to do if my Pioneer DVR-RT501-S DVD Recorder playback doesn’t start?
If your Pioneer DVD Recorder is not starting playback, make sure a disc is inserted. If a disc is already inserted, it might be dirty; try cleaning it. Keep in mind that the unit cannot play DVD-ROMs. Ensure the disc is not a DVD-RAM, DVD+R/RW, dual disc (DVD/CD hybrid disc), or another incompatible format.
How to troubleshoot a Pioneer DVR-RT501-S that does not operate?
If your Pioneer DVD Recorder or VCR isn't operating, ensure the power cord is properly plugged in. Try a different AC outlet to rule out power issues. Check your fuse or circuit breaker to make sure power is available. You can also try unplugging the unit and then plugging it back in. Finally, make sure you've selected the DVD or VCR mode before attempting to use it.
Why is there no sound coming from my Pioneer DVR-RT501-S DVD Recorder?
If your Pioneer DVD Recorder isn't producing any sound, first ensure the unit is connected to your audio system correctly. Check that the input selector on your amplifier is set properly. Also, verify that the unit is not in a special playback mode, as this can sometimes affect audio output.
Why is my Pioneer DVR-RT501-S remote control not working?
If the remote control for your Pioneer DVD Recorder isn't working, first aim the remote at the remote sensor on the unit from a distance of approximately 5 meters. Ensure there are no obstacles blocking the path of the beam. Weak batteries can also cause this issue, so try replacing them, making sure they are inserted correctly. Also, too much light in the room can interfere with the remote's signal; try reducing the light.
Why can't I change the subtitles on my Pioneer DVD Recorder?
General| Type | DVD Recorder |
|---|---|
| Tuner | NTSC |
| Video Recording Modes | XP, SP, LP, EP |
| Audio Recording Format | Dolby Digital |
| Video D/A Converter | 10-bit / 27MHz |
| Audio D/A Converter | 24-bit/96kHz |
| Media Type | DVD-R, DVD-RW |
| Playback Format | DVD-Video, DVD-R, DVD-RW, DVD+R, DVD+RW, CD-DA, CD-R, CD-RW, MP3, JPEG |
| Connectors (Rear) | Composite Video Output, S-Video Output, Component Video Output, RF Input, RF Output |
| Connectors (Front) | Composite Video Input, S-Video Input |
| Inputs | Composite Video, S-Video, RF |
| Outputs | Composite Video, S-Video, Component Video, RF |
Warnings about water, moisture, opening the unit, and electrical hazards.
Caution regarding Class 1 laser product with Class 3B laser diode inside.
Do not place naked flames, ensure proper ventilation, avoid extreme temperatures.
Handle plug carefully, do not pull cord, route safely, check for damage.
Covers cleaning, accessories, water hazards, placement, overloading, and servicing.
Conditions under which to refer servicing to qualified personnel.
Lists compatible discs and discs that cannot be played back.
Explains region codes for DVD playback compatibility.
Details DVD-RW and DVD-R discs for video recording.
Explains VR and Video modes for recording and their compatibility.
Diagram for connecting VCR/DVD to TV and aerial using SCART/coaxial.
Configuration for recording from a satellite receiver.
Connecting to TV with component video for progressive scan.
Connecting to stereo/AV amplifiers for audio output.
Procedure for automatic channel search and clock setting.
Step-by-step guide to loading, playing, and stopping discs.
Enabling progressive scan for higher quality picture output.
Information on DVD-RW and DVD-R discs for recording.
Details on recording modes (XP, SP, LP, EP) and their quality/time.
Steps to select mode, channel, and start recording a TV program.
How to stop or pause recording and resume later.
Information on auto rewind and potential recording errors.
Simple method to make timed recordings using the remote.
Introduction to the VIDEO Plus+ programming system.
Ensuring correct channel mapping for VIDEO Plus+ system.
Steps to enter PlusCode and select recording type (Once, Daily, Weekly).
Setting date, start/end times, channel, record destination, and mode.
Explains title menus, original titles, and playlists.
Shows editable items for VR mode vs. Video mode discs.
Steps for dubbing content from a video tape to a disc.
Steps for dubbing content from a disc to a video tape.
Options to dub only selected titles, playlists, or scenes.
List of error messages and their possible solutions.
Common issues like no picture, no sound, remote not working.
Problems with playback, recording, and disc compatibility.
Instructions for cleaning video heads to improve picture quality.
Procedure to reset the unit to its default factory settings.
To Next Page
