Need help?Do you have a question about the Pioneer Elite VSX-47TX and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| THX Certification | Yes |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Video Conversion | Composite to S-Video / Component |
| Signal-to-Noise Ratio | 100 dB |
| Input Sensitivity | 200 mV |
| Impedance | 8 Ohms |
| Frequency Response | 5 Hz - 100 kHz |
| Input/Output | Component Video |
| Audio Formats Supported | Dolby Digital |
| Digital Audio Inputs | 2 x Coaxial |
| Surround Sound Processing | Dolby Digital EX |
Explains the MCACC system for easy surround sound setup and room calibration.
Details digital and analog connections for DVD players and TVs, including diagrams.
Guides on connecting speakers, including terminal details and impedance recommendations.
Covers initial unit setup and assigning digital inputs for proper component recognition.
Provides an automatic method for configuring surround sound based on speaker setup and room acoustics.
Instructions for connecting different speaker configurations, including terminal details.
Guides on selecting speaker types, sizes, and subwoofer settings for optimal surround sound.
Instructions for setting channel delay times based on speaker distances for accurate sound staging.
Details how to balance the sound output levels of individual speakers for proper channel balance.
Explains the room equalization feature to adjust frequency balance for optimal sound.
Explains how to program the remote to control external devices like VCRs, TVs, and DVD players.
Offers solutions for common problems related to power, setup, audio output, and remote control operation.
To Next Page