Need help?Do you have a question about the Pioneer GM-5400T and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Frequency range | 20 - 20000 Hz |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| Channels quantity | 2 channels |
| Dimensions (WxDxH) | 265 x 346 x 62 mm |
| Connectivity technology | Wired |
| Line-in | Yes |
| Product color | Black |
Weight and Dimensions| Weight | 3800 g |
|---|
Details about user rights and equipment operation.
Information on contacting Pioneer for service and warranty.
Guide on using the Pioneer website for product registration and updates.
Crucial safety and preparation steps before connecting or installing the amplifier.
Identification of the amplifier's front and rear panel controls and indicators.
Guidance on adjusting the gain control to prevent distortion and protect the unit.
Visual guide illustrating all necessary connections for the amplifier.
Important warnings and precautions to observe before making any connections.
Explanation and diagrams for proper bridged mode connection for two-channel amplifiers.
Guidelines on selecting speakers with appropriate impedance to avoid damage.
Instructions for connecting speakers in two-channel (stereo) or one-channel (mono) modes.
Specific connection diagram for utilizing the amplifier in a one-channel (mono) configuration.
How to connect the amplifier using speaker-level inputs from the car stereo.
Detailed steps for safely connecting the main power supply wires to the amplifier.
Procedures for preparing and connecting speaker wires to the amplifier's output terminals.
Critical warnings and precautions to ensure safe and correct amplifier installation.
Step-by-step guide for physically mounting the amplifier in a vehicle.
Technical details and performance metrics of the GM-5400T amplifier.
To Next Page
