Need help?Do you have a question about the Pioneer GM-X742 and is the answer not in the manual?
Provides guidance for resolving operational issues and contacting service.
Details critical safety precautions for installation and operation to prevent damage or injury.
Adjusts input sensitivity to match the car stereo's output for optimal sound.
Enhances bass frequencies by adjusting the boost level and selecting the frequency.
Sets the cut off frequency for low-pass or high-pass filtering of audio signals.
Explains the power indicator light and the Beat Frequency Control switch function.
Selects Low-Pass Filter (LPF) or High-Pass Filter (HPF) for speaker output.
Important safety and damage prevention guidelines for wiring and installation.
Visual guide illustrating all necessary connection points for the amplifier.
Step-by-step instructions for connecting the power and ground wires.
Procedure for connecting speaker wires to the amplifier's output terminals.
Details on connecting speaker wires for two-channel (stereo) and one-channel (mono) modes.
Essential safety and performance tips for installing the amplifier securely and preventing damage.
Illustrates how to physically mount the amplifier using tapping screws on the floor mat or chassis.
Detailed technical data for the GM-X942 model, including power, dimensions, and response.
Detailed technical data for the GM-X742 model, including power, dimensions, and response.
General| Channels | 4 |
|---|---|
| Bridged RMS Power Output (4 Ohms) | 150 Watts |
| Frequency Response | 10Hz |
| Signal to Noise Ratio | 100dB |
| Crossover Frequency | 40 Hz |
| Bass Boost | 0 dB |
To Next Page
