Need help?Do you have a question about the Pioneer GM-A3602 and is the answer not in the manual?
General| Amplifier class | A/B |
|---|---|
| Low pass filter | Yes |
| RMS output power (max) | 400 W |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Number of amplifier channels | 2 channels |
| RMS power output per channel (2 Ohm) | 180 W |
| RMS power output per channel (4 Ohm) | 120 W |
| Audio RCA inputs | 1 |
| Product color | Black |
Weight and Dimensions| Depth | 178 mm |
|---|---|
| Width | 241 mm |
| Height | 64 mm |
User is thanked and advised to read the manual for proper use and future reference.
Information on how to contact for service, warranty, or other inquiries.
Explains FCC compliance and potential interference issues for the device.
Guide to setting safe listening levels to prevent hearing damage from loud sound.
Crucial warnings and safety guidelines before starting amplifier installation.
Identifies and describes the front and rear panel controls and indicators of the amplifiers.
Guidance on adjusting the gain control for optimal performance and to prevent distortion.
Visual representation of the amplifier's terminals and recommended connections for installation.
Essential warnings and cautions regarding wiring and connections before installing the amplifier.
Instructions and warnings for connecting speakers in bridged mode for higher power output.
Detailed instructions for connecting speakers in stereo or mono configurations.
Step-by-step guide for connecting the power supply wires to the amplifier.
Critical safety warnings and installation guidelines for safely mounting the amplifier.
Provides a visual guide and steps for physically mounting the amplifier in a vehicle.
Detailed technical specifications for both GM-A5602 and GM-A3602 amplifier models.
Power output and S/N ratio information according to CEA2006 standards for amplifiers.
To Next Page
