Need help?Do you have a question about the Pioneer GM-A5702 and is the answer not in the manual?
General| Purpose | Car |
|---|---|
| Fuse rating | 30A x 2 |
| Product color | Black, Red |
| Bridge function | Yes |
| Low pass filter range | 40 - 500 Hz |
| Connectivity technology | Wired |
| Bass boost | 0 - 12 dB |
| Amplifier class | A/B |
| Frequency range | 10 - 70000 Hz |
| RMS rated power | 1000 W |
| Audio output channels | 2.0 channels |
| Peak power per channel | 480 W |
| Signal-to-Noise Ratio (SNR) | 75 dB |
| Total Harmonic Distortion (THD) | - % |
| RMS power output per channel (1 Ohm) | 300 W |
| Line inputs (RCA) | 2 |
| Speakers connectivity type | RCA |
| Maximum current | 36 A |
| DC input voltage | 14.4 V |
Weight and Dimensions| Depth | 215 mm |
|---|---|
| Width | 356 mm |
| Height | 60 mm |
| Weight | 2220 g |
Avoid short circuits, liquid contact, and improper wiring during installation.
Follow warnings for proper installation to prevent damage or injury.
Set gain correctly to prevent malfunction and ensure continuous sound.
Follow warnings for wiring, short circuits, and component placement.
Proper and improper wiring for bridged mode operation.
Route battery wire from engine compartment to vehicle interior.
Follow warnings and cautions for safe and proper amplifier installation.
Procedures for obtaining service and resolving warranty disputes.
Instructions on how to get warranty service and contact support.
To Next Page
