Need help?Do you have a question about the Pioneer GM-D9601 and is the answer not in the manual?
General| Bass boost | 0 - 18 dB |
|---|---|
| Amplifier class | D |
| Frequency range | 10 - 240 Hz |
| Audio output channels | 4.0 channels |
| Peak power per channel | 2400 W |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 1 % |
| RMS power output per channel (1 Ohm) | 1200 W |
| RMS power output per channel (2 Ohm) | 800 W |
| RMS power output per channel (4 Ohm) | 500 W |
| Speakers connectivity type | RCA |
| Purpose | Car |
| Product color | Black |
| Connectivity technology | Wired |
| Maximum current | 39 A |
Weight and Dimensions| Depth | 200 mm |
|---|---|
| Width | 315 mm |
| Height | 60 mm |
| Weight | 3300 g |
Information on obtaining after-sales service and warranty for Pioneer products.
Guidance on contacting support if the product fails to operate properly.
Advice on setting safe listening levels to protect hearing.
Essential guidelines for safe operation and use of the amplifier.
Description of the product as a mono amplifier for subwoofers.
Warnings and precautions before connecting and installing the amplifier.
Explanation of the product's protection function and indicator lights.
Instructions to record the serial number for security and convenience.
Identifies and describes the front and rear panel controls of the GM-D8601 and GM-D9601.
Guidance on properly setting the gain control to prevent malfunction.
Details on setting the gain control based on preout levels.
Explains how amplifier gain affects output power and distortion.
Visual guide illustrating various connection points and components for the amplifier.
Warnings and cautions to observe before connecting the amplifier.
Instructions for connecting speakers, including parallel connection precautions.
Important precautions for connecting speakers in parallel to avoid damage.
How to connect the car stereo speaker output wires to the amplifier.
Instructions and warnings for connecting the power terminal, including wire size recommendations.
Step-by-step guide to connecting speaker wires to the output terminals.
Warnings and cautions regarding the proper installation of the amplifier.
Instructions for attaching the bass boost remote control unit.
Steps for placing and drilling holes for amplifier installation on floor mats or chassis.
Detailed technical specifications for the GM-D8601 model.
Detailed technical specifications for the GM-D9601 model.
Specifies compliance with CEA2006 standards for amplifier performance.
General notes regarding specifications and design modifications.
To Next Page