Pioneer PDP-42MXE20 User Manual

PLASMA DISPLAY MONITOR: PDP-50MXE20/PDP-50MXE20-S/PDP-42MXE20
VIDEO CARD: PDA-5003/PDA-5004
TABLE TOP STAND: PDK-TS01/PDK-TS07
TILT MOUNT UNIT: PDK-5011
WALL MOUNT UNIT: PDK-WM01
CEILING MOUNT UNIT: PDK-5012
MOBILE CART: PDK-5014
PDP BRACKET: PDK-5005
SPEAKER SYSTEM: PDP-S53-LR/PDP-S54-LR/PDP-S56-LR
This manual provides precautions and information for installation, preparation, and handling of the Plasma Display and
its dedicated mounting hardware.
Before installation and preparatory work, choose a safe and appropriate site after thorough consideration of construction,
materials used, strength, and surroundings. If adequate safeguards are not in place, immediately halt the installation
process and discontinue marketing activities.
TECHNICAL MANUAL (Ver. 1.0)
FOR PIONEER PLASMA DISPLAY MONITOR WHEN USED WITH
VIDEO CARDS (EXPANSION SOLUTIONS CARDS)
To use this product safely
• When using this product attached to a ceiling or wall or
piled up, there is a danger that, according to its weight or
attachment method, it may fall down or fall over.
• In order to use this product safely, be sure to have a
professional installer or the retail agent perform the
installation work. Verify that it is appropriately attached and
take adequate safety measures.
ABOUT MOUNTING/INSTALLATION
• This product is sold under the assumption that installation
will be performed by experienced, qualified experts.
Refer all mounting and installation work to qualified
personnel or consult the nearest PIONEER dealer for
assistance.
• We accept no responsibility for accident or loss resulting
from failure to select an appropriate installation site,
situations occurring during assembly, installation,
mounting, operation resulting from modifications made
to this product, or from natural disasters.
PRECAUTIONS:
• We accept no responsibility for losses resulting from the
use of parts other than those supplied by Pioneer or those
authorized by Pioneer.
• We guarantee the performance of our products only when
they are assembled and adjusted as described in this
manual.
• The specifications and external designs shown in this
manual are subject to change without notice.
Attention professional installer
• Install this product according to the instructions in the
owner’s manual or installation manual.
• To ensure safety when this product is installed on a ceiling,
wall or stacked be sure to take measures to prevent any
danger of the panel(s) falling down or falling over.
• Choose an installation or attachment location that has
sufficient strength to fully withstand its weight.
• When installing it on the floor, select an adequately stable,
flat, and level place.
• To prevent damage to the power or connection cords, take
great care not to place any equipment on them or pinch
them between any equipment.
• Absolutely do not alter the product or any of its attachment
hardware.

Pioneer PDP-42MXE20 Specifications

General

Screen Size	42 inches
Display Type	Plasma
Resolution	1024 x 768 pixels
Brightness	1000 cd/m²
Contrast Ratio	3000:1
Viewing Angle	160 degrees
Aspect Ratio	16:9
Response Time	0.001 ms
Input Terminals	Component, Composite

Summary

Product Overview and Specifications

Technical Manual Introduction

Overview of the technical manual's purpose and content.

Plasma Display Key Features

Highlights key features and advancements of the PDP-50MXE20 and PDP-42MXE20.

Model Specifications

Detailed technical specifications including dimensions and input/output terminals.

Installation Guidance

Installation Site Requirements

Details necessary conditions and safety precautions for the installation site.

PDP-50MXE20 Installation Conditions

Specific installation conditions for the PDP-50MXE20, focusing on heat dissipation.

Unpacking and Installation Procedures

Covers transportation precautions, unpacking, and general installation steps.

Mounting Hardware and Accessories

Standard Mounting Component Features

Describes the features and characteristics of various standard mounting hardware.

Video Card PDA-5003/PDA-5004 Specifications

Details specifications and input/output jacks for the PDA-5003/PDA-5004 video cards.

Table Top Stand PDK-TS01/PDK-TS07 Details

Provides specifications and installation for the table top stands.

Operation and Adjustment Modes

Adjustment Preparation and Methods

Outlines methods and considerations before starting display adjustments.

Menu Mode Guide

Details how to navigate and use the on-screen menu for settings.

Integrator Mode Advanced Settings

Describes advanced settings and adjustments available in the integrator mode.

Advanced Control and Safety

RS-232C Control and Commands

Explains RS-232C interface, commands, and connection protocols for PC control.

Screen Burning Prevention Methods

Discusses methods to prevent screen burn-in and related functions.

General Precautions and Error Handling

Lists important precautions, self-diagnosis functions, and error messages.