30
En
Other Operations
English
2 Use the 2/3 buttons to select [OPTION].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
PICTURE SCREEN SETUP
OPTION
3 Use the 5/∞ buttons to select [MASK CONTROL].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
PICTURE SCREEN SETUP OPTION
4 Press the SET button to activate the setting.
The factory default setting is [ON].
Each time the button is pressed, the setting alternates
as follows:
5 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
The [MASK CONTROL] setting affects all input sources.
3 OFF
ON 2
Screen management settings
(SCREEN MGT.)
In order to alleviate burning of lag images in the screen,
this plasma display is equipped with a screen
management program that allows automatic switching of
the display image at regular intervals. The program can be
set to determine how the 24-hour screen management
cycle is repeated.
For information about detailed screen management
settings, consult your professional installation technician.
1 Press the MENU button to display the menu
screen.
MENU INPUT1
PICTURE SCREEN SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
R.LEVEL
G.LEVEL
B.LEVEL
H.ENHANCE
V.ENHANCE
PICTURE RESET
2 Use the 2/3 buttons to select [OPTION].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
PICTURE SCREEN SETUP
OPTION
3 Use the 5/∞ buttons to select [SCREEN MGT.],
then press the SET button.
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
PICTURE SCREEN SETUP OPTION
4 Use the 5/∞ buttons to select [STATUS].
SET
EXIT
MENU
:
:
RETURN
SCREEN MGT.
STATUS
TIME TO ACTIVATE
START
OFF
01H00M
5 Use the 2/3 buttons to select [ONCE] or
[REPEAT].
The factory default setting is [OFF].
Each time the button is pressed, the setting alternates
as follows:
÷ ONCE ....... The screen management program is
performed once only.
÷ REPEAT .... The screen management program is
performed repeatedly (24-hour cycle).
÷ OFF .......... Screen management program is
disabled, and normal screen image is
displayed continuously.
Other Operations
MENU
2/3
5/∞
SET
MENU
5/∞
SET
2/3
Main unit operating
panel
Remote control unit
3 OFF 2
3 REPEAT 2
3 ONCE 2
To Next Page
Loading...
