PLASMA DISPLAY MONITOR: PDP-503CMX/PDP-503MXE
PDP-433CMX/PDP-433MXE
VIDEO CARD: PDA-5002
TABLE TOP STAND: PDK-TS01
PDP BRACKET: PDK-5005
PLASMA DISPLAY WALL-MOUNT HARDWARE: PDK-5011
PLASMA DISPLAY CEILING SUSPENSION HARDWARE: PDK-5012
PLASMA DISPLAY WALL-MOUNT HARDWARE: PDK-5013
MOBILE CART: PDK-5014
CABLE COVER: PDA-P01
SPEAKER SYSTEM: PDP-S05-LR
PDP-S07-LR
ABOUT MOUNTING/INSTALLATION
÷ This product is sold under the assumption that
installation will be performed by experienced,
qualified experts. Refer all mounting and
installation work to qualified personnel, or consult
the nearest PIONEER dealer for assistance.
÷ We accept no responsibility for accident or loss
resulting from failure to select an appropriate
installation site, or for those occurring during
assembly, installation, mounting, or operation of
this product, or resulting from modifications made
to this product, or from natural disasters.
PRECAUTIONS:
• We accept no responsibility for losses resulting from
the use of parts other than those supplied by us.
• We guarantee the performance of our products only
when they are assembled and adjusted as described in
this manual.
• The specifications and external designs shown in this
manual are subject to change without notice.
CAUTION
Exclamation marks placed within triangles are
intended to alert users to the presence of important
safety information. Be sure to read instructions
indicated by this symbol.
This manual provides precautions and information for installation, preparation, and handling of the plasma display and
its dedicated mounting hardware.
Before installation and preparatory work, choose a safe and appropriate site after thorough consideration of construction,
materials used, strength, and surroundings. If adequate safeguards are not in place, immediately halt the installation
process and discontinue marketing activities.
TECHNICAL MANUAL (Ver. 2.0)
To Next Page
Need help?
General