Pioneer PDP-433CMX User Manual

170
22) Input settings when using a video card other than the PDA-5002
Make settings in accordance with the input signals from the video card provided.
For details, see the instruction manual on video cards.
(NOTE) These settings may not be accessed or adjusted or if unsupported by the expansion video card.
Factory preset : VIDEO (RGB)
1 Enter integrator mode.
(See 5.4.1, “About the integrator mode.”)
The set ID will be displayed on the upper right where the
“– –“ mark is.
Select OPTION.
2 Move the cursor to SLOT INPUT and then use the SET
button to change the setting.
Each time the SET button is pressed, the setting will change
as follows: VIDEO (RGB) = COMPONENT1 =
COMPONENT2 = ···
SLOT INPUT applies to all input.
Screen 1
Screen 2
]
]
:O FFOEDMROMRRI
OTLROCFNAN
AEMNOTMINOR AMPSAL
INPUT1
––
INTEGRATOR MENU
CHANGE EXITMENU SET SELECT
T
H
:
:
0
CH
H
EPERATUREM
OUR
SLOT
METER
VIDEO
(
RGB
)
INPUT
000 0
I:
:
:
––DNOSET.
AOTU:
PICTURE WHITE BAL SCREEN SET UP OPTION
O
D:
:
:
:
:
:
:
:
:
AA
S D
E
M
T
T
B
O
U
R
NO
FF
OFF
OF/F
OFF
OFF
ON
E
R
LUAKSF
S
L
E
I
DI
M
AKSM
OEDM
OEDM
OEDMOEDM
AKSMLOT
E
N
TO
R
I
O
BRR
C
ENSE
R
I
C
V
OLO
R
48 B 00
128
/ 1
1
28 128 /
1
0 / 0 .W/
PS
INPUT1
––
INTEGRATOR MENU
CHANGE EXITMENU SET SELECT
PICTURE WHITE BAL SCREEN SET UP OPTION
Integrator Mode
21) Assigning an ID
Here, an ID is assigned necessary for making adjustments in RS-232C adjustment mode.
For details, see 5.5, “RS-232C adjustment mode.”
Factory preset : – –
1 Enter integrator mode.
(See 5.4.1, “About the integrator mode.”)
The set ID will be displayed on the upper right where the
“– –“ mark is.
Select ID NO. SET under OPTION.
2 Use the 2 and 3 buttons to select the appropriate digit,
then use the 5 and ∞ buttons to change the numerical
values and press the SET button to set the value.
IDs can be set from 00 to FF.
Screen 1
Screen 2
]
]
:
:
OFF
AOTU
OEDMROMRRI
OTLROCFNAN
AEMNOTMINOR AMPSAL
INPUT1
––
INTEGRATOR MENU
ENTER EXITMENU SET SELECT
T
H
:
:
0
CH
H
EPERATUREM
OUR METER
000 0
I:
:
––DNOSET.
PICTURE WHITE BAL SCREEN SET UP OPTION
SOT:NID . E
SELECT
EXIT
SET
MENU
SET
CHANGE
––

Pioneer PDP-433CMX Specifications

General

Brand	Pioneer
Model	PDP-433CMX
Category	Monitor
Language	English