Using the Electronic Programme Guide (EPG)(for DTV/SAT only) 10
53
En
English
Using other useful EPG functions
Below are some useful functions that guide you through the EPG
screen and save your time.
EPG Jump
1 Press TOOLS when the EPG screen (Programme List,
Programme Information and Search Result) is displayed.
2 Select “JUMP(6Hour)”, “JUMP(2Hour)” or “JUMP(Day)” (
/
).
3 Select the desired option (
/
).
If you select “JUMP(6Hour)” or “JUMP(2Hour)”, select “+6Hour” or
“–6Hour”, or “+2Hour” or “–2Hour”.
Note
• Refer to the TOOLS Menu on page 73.
EPG Search
1 Press TOOLS when the EPG screen (Programme List,
Programme Information and Search Result) is displayed.
2 Select “Search” (
/
then ENTER).
3 Select “Date” (
/
).
4 Select the day (within one week) to search (
/
).
5 Select “Time” (
/
).
6 Select the time of the day (0:00 to 23:00) to search (
/
).
7 Select “Channel Mode” (
/
).
8 Select whether to search “All Ch” or “Favourites” (
/
).
9 Select “Genre” (
/
then
ENTER
).
10 Select the genre(s) to search (
/
,
/
then
ENTER
).
Pressing ENTER again will delete the selected genre from the
search list.
11 Select “OK” (
/
,
/
then
ENTER
).
An EPG search with your customized settings starts.
Pressing ENTER while “Start” is selected on the Search screen
causes the Search Result to appear on screen.
“No programme found.” appears if no programmes are available.
Date : Tue 26. Jun
Time : 7:00
Channel Mode : All Ch
Genre
Search
Start
All Genres Selected.
PDP-LX609H.book Page 53 Wednesday, August 6, 2008 4:00 PM
Downloaded From TV-Manual.com Manuals
To Next Page
Loading...
Need help?
General
