Need help?Do you have a question about the Pioneer PL-100X and is the answer not in the manual?
Step-by-step guide to removing the panel and base plate.
Steps to remove the arm base and sub-panel assembly.
Steps to properly set the auto-return function.
How to adjust the motor speed using the FG system.
Instructions for setting the tonearm's vertical movement height.
Specific steps to fix auto-return failures.
Addresses issues where the tonearm returns too quickly.
Details specific points requiring lubrication and types of oil.
Guidelines for correctly attaching components during reassembly.
Exploded view of the external components.
Exploded view and parts list for the sub-panel assembly.
Lists specific part numbers for various assemblies.
Detailed electrical schematic of the turntable's circuitry.
Diagram showing how different PCBs connect within the unit.
Step-by-step guide to removing the panel and base plate.
Steps to remove the arm base and sub-panel assembly.
Steps to properly set the auto-return function.
How to adjust the motor speed using the FG system.
Instructions for setting the tonearm's vertical movement height.
Specific steps to fix auto-return failures.
Addresses issues where the tonearm returns too quickly.
Details specific points requiring lubrication and types of oil.
Guidelines for correctly attaching components during reassembly.
Exploded view of the external components.
Exploded view and parts list for the sub-panel assembly.
Lists specific part numbers for various assemblies.
Detailed electrical schematic of the turntable's circuitry.
Diagram showing how different PCBs connect within the unit.
General| Overhang | 15.5 mm |
|---|---|
| Power Supply | AC 120V, 60Hz |
| Speeds | 33 1/3, 45 RPM |
| Motor | DC motor |
| Platter | Aluminum die-cast |
| Tonearm | Static-balance type |
| Cartridge | Moving Magnet (MM) type |
| Output | 2.5mV at 1kHz |
| Dimensions (W x H x D) | 420 x 118 x 365mm |
| Effective Arm Length | 221.5mm |
| Cartridge Weight Range | 4-10 g |
To Next Page
