To Next Page
J
Joseph DennisAug 7, 2025
How to fix broken sound on Pioneer S-71W Subwoofer?
- PprossAug 7, 2025
If your Pioneer Subwoofer is producing a broken sound, the auto standby function might be activated. You should turn the auto standby function off.
How to fix broken sound on Pioneer S-71W Subwoofer?
If your Pioneer Subwoofer is producing a broken sound, the auto standby function might be activated. You should turn the auto standby function off.
How to fix Pioneer S-71W Subwoofer when no power is being supplied?
If your Pioneer Subwoofer isn't receiving power, and the indicator light doesn't turn on when you switch it on, the power supply plug may not be correctly inserted. Ensure the plug is securely inserted.
Why is my Pioneer S-71W sound distorted?
If the sound from your Pioneer Subwoofer is distorted, it might be due to the level being too high. Try turning the VOLUME knob counter-clockwise to lower the level. Also, the input level could be too high, so adjust the amplifier’s output level (volume, bass control, bass boost) counter-clockwise to decrease it.
How to fix no sound on Pioneer Subwoofer when the indicator is blue?
If your Pioneer Subwoofer isn't producing any sound and the indicator light is blue, the RCA plug cord might not be correctly connected, so double-check the connection. Alternatively, the VOLUME knob might be set to MIN; slowly turn it clockwise to increase the volume.
What to do if my Pioneer S-71W Subwoofer makes a howling noise?
If you're experiencing a howling noise with your Pioneer Subwoofer, ensure that an amplifier is connected and has power. Also, the subwoofer level may be too high. Try placing the subwoofer further from the speakers and turn the VOLUME knob counter-clockwise to reduce the volume.
What to do if Pioneer Subwoofer has no sound but the indicator is red?
If your Pioneer Subwoofer has no sound and the indicator light is red, it could be due to no input signal. Try turning the auto standby function off.
Why is my Pioneer S-71W Subwoofer making noise on AM/FM broadcasts?
If there's a lot of noise when listening to AM or FM broadcasts with your Pioneer Subwoofer, the AM loop antenna or the FM indoor antenna might be too close to the unit. Increase the distance between the AM or FM antenna (for indoor use) and the subwoofer.
General| Driver Size | 10 inches |
|---|---|
| Enclosure Type | Bass Reflex |
| Inputs | Line-Level (RCA), Speaker-Level |
| Outputs | Speaker-Level |
| Type | Subwoofer |
| Crossover Frequency | 50Hz - 150Hz |
