Do you have a question about the Pioneer S-FCRW230 and is the answer not in the manual?
tweeter size | 3/4 inch |
---|---|
midrange size | 3 inch |
nominal impedance | 8 ohm |
frequency range | 100-20k Hz |
sensitivity | 85 dB |
maximum input power | 100 W |
external dimensions | 4 5/16” x 9 5/8” x 6 1/2” |
weight | 3.0 lb |
fullrange size | 3 inch |
---|---|
nominal impedance | 8 ohm |
frequency range | 100-20k Hz |
sensitivity | 85 dB |
maximum input power | 100 W |
external dimensions | 4 5/16” x 6 1/8” x 3 1/16” |
weight | 1.3 lbs |
fullrange size | 3 inch |
---|---|
nominal impedance | 8 ohm |
frequency range | 100-20k Hz |
sensitivity | 85 dB |
maximum input power | 100 W |
external dimensions | 4 5/16” x 6 1/8” x 3 1/16” |
weight | 1.0 lb |
speaker size | 20 cm |
---|---|
power output | 100 Watts |
input sensitivity | 100 mV / 18 kW |
crossover frequency | 150 Hz |
external dimensions | 8 3/8” x 14 1/14” x 16” |
weight | 17 lb. 12 oz. |
power requirements | 120 VAC, 60 Hz |
power consumption | 64 W 130 VA |
Disassembly details for the subwoofer's power amp, front panel, and speaker.
Notes that satellite speakers are supplied as complete assembly units.
Lists packing materials and cases required for different model types.
Details the external parts and physical layout of the subwoofer and satellite speakers.
Contains schematic diagrams related to the exterior section of the system.
Shows schematics and block diagrams for the Amplifier and Operation Assemblies.
Lists the essential measuring instruments required for system adjustments.
Guides on how to adjust the system's audio gain level for correct output.