EasyManuals Logo

Pioneer SC-LX701 User Manual

Pioneer SC-LX701
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
> Before start > Hookup > Setup > Playback > Part Names > Advanced Manual
Troubleshooting | Appendix
ZONE2
ZONE 2 SPEAKER
ZONE 2 PRE/LINE OUT
1
MAIN ROOM
LINE
IN
2
Depending on the combination of speakers, you
may need to connect to other jacks. See "Points to
note with speaker combinations" (P9) for details.
1 Analog audio cable, 2 Speaker cable
ZONE 2 PRE/LINE OUT /
ZONE 2 SPEAKER
You can enjoy audio in the separate room by, for example, playing a
Blu-ray Disc player in the main room (where this unit is located) and
listening to internet radio in the separate room (ZONE 2).
Connections with an AV component
Connect with HDMI IN 1 to 5 if you want to output an
external AV component to ZONE 2. If the AV component
doesn't have an HDMI jack, connect using a digital optical
cable, digital coaxial cable, or analog audio cable.
ZONE 2 PRE/LINE OUT
It is possible to play 2 ch sources in a separate room while
sources with a maximum of 11.1 ch are being played in the main
room. Connect the ZONE 2 PRE/LINE OUT jacks of the unit and
the LINE IN jacks of the pre-main amplifier or the power amplifier
in a separate room with an analog audio cable.
ZONE 2 SPEAKER
It is possible to connect speakers in a separate room and
play 2 ch sources.
0
You can play through a maximum of 7.1 channels in the main
room during ZONE 2 playback. With Bi-Amping connection or
while ZONE 3 speaker connection settings are enabled, no
sound is heard from the surround back speakers or height
speakers and a maximum of 5.1 channel playback is possible
in the main room. Listening modes such as Dolby Atmos
cannot be selected.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (
P23) to enjoy this feature.
0
The audio from externally connected AV
components can only be played in ZONE 2 when the
audio is analog or 2ch PCM audio. If you have
connected to this unit with an HDMI cable or digital
optical/coaxial cable, may be necessary to convert
the audio output of the AV component to PCM output.

Other manuals for Pioneer SC-LX701

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pioneer SC-LX701 and is the answer not in the manual?

Pioneer SC-LX701 Specifications

General IconGeneral
Display-
Product colorSilver
Audio decodersDTS 96/24, DTS-ES, DTS-HD, DTS-HD HR, DTS-HD Master Audio, Dolby Digital Plus, Dolby Surround, Dolby TrueHD
Audio amplifierYes
Apple docking compatibilityNot supported
Receiver typeSurround
Frequency range20 - 20000 Hz
Audio output channels9.2 channels
Dynamic power per channel (4 Ohm)220 W
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (1KHz@8 Ohm)135 W
Power output per channel (20-20KHz@8 Ohm)- W
HDMI in8
Digital audio optical in3
Ethernet LAN (RJ-45) ports1
Component video (YPbPr/YCbCr) in2
Headphone connectivity3.5 mm
Multichannel audio output typeTerminals
Speakers connectivity typeBinding post
Audio formats supportedAAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA
Bluetooth version4.1
Bluetooth profilesA2DP, AVRCP
Supported radio bandsAM, FM
Preset stations quantity40
Internet radio services supportedPandora, TuneIn
Card reader integratedNo
AC input voltage220-230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.15 W
Power consumption (typical)310 W
Supported video modes1080p, 2160p
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth441 mm
Width435 mm
Height185 mm
Weight15300 g

Related product manuals