Pioneer TX-9800 Operating Instructions

AM/FM STEREO TUNER
OPERATING INSTRUCTIONS
X=938s00
Walnut grained! viny! top and side panes are used in the
Before. operating your TX-9800 AM/FM STEREO
TUNER, please read these Operating Instructions
‘through and then you will know how fo connect the
stereo tuner properly and operate rectly
This will ensure that you enjoy the stores performance
to the full
After reading these instructions, keep them in a safe
place together with the warranty card, Then you will
know exactly where it isin ease you wish to reler to It
CONTENTS
Features ...0.. 00. a
Connection Diagram a
Installation Precautions. 8
Gonnections . 4
Antenna and Ground Conne 4
Front Panel Facilities 6
Listening to Broadeasts. : 7
Accessory Functions... 8
FM-Dolby Reception 8
Installing the FM Antenna 9
FM Multipath Distortion . . 10
Specifications u
Conditions Frequently Mistaken
for Malfunctions .......ssseeseseeee 12
Schematie Diagram, Insertion
IMPORTANT NOTICE
The serial number for this equipment is located on the
rear panel, Please write this serial number on your
enclosed warranty card and keep in a vecure atea. This
1s for your security
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
1

Pioneer TX-9800 Specifications

General

Tuning Type	Digital
FM Frequency Range	87.5 - 108 MHz
Signal-to-Noise Ratio (AM)	50 dB
Capture Ratio (FM)	1.5 dB
Output (MW)	0.5 V
Type	Stereo Tuner
AM Frequency Range	530 - 1605 kHz
Total Harmonic Distortion (AM)	0.3% (MW)
Selectivity (AM)	40 dB
Output Voltage	1 V
Output (FM)	1.0 V
Frequency Response (FM)	30 - 15, 000 Hz