To Next PageTo Next PageWhy is there no sound from surround or center speakers connected to my Pioneer VSX-330-K?
If you're not getting sound from your surround or center speakers with your Pioneer Receiver, connect the speakers properly. Check the speaker settings. Also, check the speaker levels.
Why is there no sound from the subwoofer connected to my Pioneer VSX-330-K?
If you're not getting any sound from your subwoofer with your Pioneer Receiver, check these things: make sure the subwoofer is turned on and if it has a volume knob, ensure it's turned up. If you are listening to a Dolby Digital or DTS source, verify that the source has an LFE channel, and switch the subwoofer setting in Speaker Setting to YES or PLUS. Also, switch the LFE ATT (LFE Attenuate) to LFEATT 0.
Why does my Pioneer VSX-330-K power suddenly turn off?
If your Pioneer Receiver suddenly turns off, first check the speaker wires at the rear panel to ensure no loose strands are touching each other or the panel. If you find stray strands, re-attach the wires carefully. Also, the Auto Power Down feature might be enabled, causing the receiver to turn off automatically at a set time.
How to fix no sound on my Pioneer Receiver?
If you're not getting any sound from your Pioneer Receiver when an input function is selected, try these solutions: first, use the VOLUME +/– buttons to increase the volume. Next, check if muting is enabled by pressing the MUTE button on the remote. Also, ensure the SIG SEL is correctly set to H (HDMI), C1/O1 (digital) or A (analog) according to your connections. Verify that all components are connected properly. Finally, check the audio output settings of the source component.
Why can't I operate the remote control of my Pioneer Receiver?
If you're unable to operate your Pioneer Receiver's remote control, try the following: replace the batteries. Ensure you're within 7 meters and 30 degrees of the remote sensor. Remove any obstacles blocking the sensor, or try operating from a different position. Avoid direct light on the remote sensor.
What to do if the Pioneer Receiver remote control is not responding?
If your Pioneer Receiver remote control isn't responding, you may need to first press the receiver button to control the receiver. If you want to control TUNER or USB, first press the TUNER or USB button on the remote.
Why does the display of my Pioneer VSX-330-K flash and cannot be operated?
If the display on your Pioneer Receiver flashes and it cannot be operated, it may be because certain functions are unavailable depending on the input signal or listening mode.
What does it mean if the HDMI indicator blinks and the power doesn't turn on on my Pioneer Receiver?
If the HDMI indicator is blinking and the power won't turn on for your Pioneer Receiver, it suggests a serious problem. Unplug the receiver from the wall and contact a Pioneer authorized service company.
Why does my Pioneer VSX-330-K turn ON/OFF automatically and switch inputs with ARC on?
If your Pioneer Receiver is automatically turning ON/OFF and switching inputs while the ARC function is ON, it may be due to the CEC (Consumer Electronic Control) function activating. Try turning OFF the HDMI CONTROL setting on the connected player. If that doesn't work, turn OFF the ARC function.
What to do if no image is output from my Pioneer Receiver?
If you're not getting any image output from your Pioneer Receiver when an input function is selected, check that the component is connected correctly. Ensure you're using the same type of video cables for both the source component and TV. Also, verify that the video input selected on the TV is correct.
General| Receiver type | Surround |
|---|---|
| Audio output channels | 5.1 channels |
| Power output per channel (20-20KHz@8 Ohm) | 105 W |
| 3D | No |
| Product color | Black |
| Audio decoders | DTS Neo:6, DTS-HD, DTS-HD Master Audio, Dolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD |
| Audio Return Channel (ARC) | Yes |
| Apple docking compatibility | Not supported |
| HDMI in | 4 |
| Composite video in | 2 |
| USB ports quantity | 1 |
| Supported radio bands | AM, FM |
| Preset stations quantity | 30 |
| Audio formats supported | AAC, MP3, WMA |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.45 W |
| Power consumption (typical) | 165 W |
| Connectivity technology | Wired |
Weight and Dimensions| Depth | 320.5 mm |
|---|---|
| Width | 435 mm |
| Height | 168 mm |
| Weight | 7300 g |
