Need help?Do you have a question about the Pioneer VSX-516-S/-K and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.09% |
| Audio Formats Supported | Dolby Digital, DTS |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 98 dB |
| Digital inputs | 2 Optical, 1 Coaxial |
| Tuner | AM/FM |
| Power Output (RMS) | 100 W per channel |
| Frequency Response | 5 Hz - 100 kHz |
| Video Inputs | 3 Composite, 1 Component |
| Video Outputs | 1 Composite |
| Audio Inputs | 4 RCA |
| Input Impedance | 47 kΩ |
Lists supplied accessories for system setup.
Instructions for inserting batteries into the remote control.
Details the effective range and conditions for the remote.
Explains the concept and benefits of home theater audio systems.
Provides a quick guide to setting up for surround sound.
Details the MCACC auto setup process for optimizing sound.
Crucial notes and cautions regarding Auto MCACC setup.
General advice on connecting cables and cable types.
Step-by-step guide for connecting a TV and DVD player.
How to connect DVD players with 5.1 channel analog outputs.
Instructions for connecting satellite and digital TV tuners.
Guides connecting various audio sources like CD-Rs, MDs, tape recorders.
How to connect VCRs, DVD-recorders, and HDD recorders.
Connects AM loop and FM wire antennas for better reception.
Guide to connecting speakers, including impedance and terminal matching.
Tips for optimal speaker placement for the best sound experience.
Illustrates 6.1 channel and Extra Power mode speaker setups.
Details the functions of buttons and indicators on the receiver's front panel.
Explains Input Select, ENTER, MULTI JOG dial, SIGNAL SELECT.
Explains MCACC indicator, SB Processing, Acoustic EQ, VSB Mode.
Features like Dialogue Enhancement, Master Volume, Phones jack, Standby/On.
Buttons for Listening Modes, Dimmer, Analog Att, Midnight/Loudness, Speaker Impedance, Mute, Tuner Edit, Tone.
Controls for Quick Setup, System Setup menu, and display information.
Lights indicating input signal type (AUTO, SB, DIGITAL, DTS, ANALOG).
Indicators for DTS, Dolby Digital, Pro Logic IIx, Direct, Auto Surround, etc.
Master volume level and MCACC channel EQ indicators.
Explains INPUT SELECT, RECEIVER, MULTI CONTROL, RECEIVER CONTROL buttons.
SLEEP, S. RETRIEVER, DIALOG E, ACOUSTIC EQ, DIMMER, MASTER VOLUME.
Buttons for System Setup and controlling other components.
HDD/DVD, REC STOP, Number buttons, INFO, SHIFT, Remote LED.
RECEIVER, STANDARD, ADV.SURR, STEREO, MIDNIGHT/LOUDNESS.
EFFECT/CH SEL, LEVEL +/-, MUTE, SHIFT, SLEEP buttons.
DIMMER, ANALOG ATT, INPUT SELECTOR, DVD/DVR, RECEIVER.
MENU, DIALOG E, Navigation, ONE TOUCH COPY, TUNER controls.
Explains playback buttons and functions for various components.
Notes on source compatibility affecting features.
Explains the Auto Surround feature for automatic source detection.
How to listen to any source in surround sound.
Lists and describes various surround sound modes for VSX-516.
How to use and experiment with different surround effects.
Adjusting parameters like Center Width, Dimension, Panorama, Effect.
How to listen in STEREO or DIRECT mode, and auto surround options.
Using EQ settings from MCACC or Auto Setup.
Selecting between analog and digital inputs for components.
How to enable or disable surround back channel processing.
Creates virtual surround sound using surround speakers.
Features for good sound at low volume levels.
Feature to make dialogue stand out.
Adjusting bass/treble and restoring compressed audio quality.
Steps to play components and select multichannel analog inputs.
Overview of making detailed settings and fine-tuning speaker systems.
Detailed adjustments for speaker settings and Acoustic Calibration EQ.
Notes on connecting the microphone and subwoofer for setup.
Adjusts the overall balance of speaker levels.
Sets precise delay for speakers to improve sound depth.
Explains room equalization to neutralize ambient characteristics.
How to automatically adjust EQ based on room acoustics.
Copies EQ settings for manual adjustment reference.
Manually adjusting EQ settings for desired frequency balance.
Verifies ALL CH, F.ALIGN, and CUSTOM settings after EQ adjustment.
Optimizes surround sound performance by adjusting speaker settings.
Specifies speaker configuration, size, and number.
Sets the cutoff frequency for bass sounds between speakers and subwoofer.
Adjusts the overall balance of the speaker system.
Assigns digital inputs to specific components.
For customized settings reflecting receiver usage.
Adjusts dynamic range for Dolby Digital/DTS soundtracks.
Isolates channels for dual mono and sets LFE attenuator level.
Steps to tune FM/AM broadcasts and memorize stations.
Enters frequencies directly using number buttons.
Memorizes and names stations for easy recall.
Switches tuning step for country compatibility.
Selects saved station presets from stored classes.
Guides recording audio/video from tuner or connected sources.
Assigns components to MULTI CONTROL buttons using preset codes.
Enters component manufacturer preset codes to enable control.
Controls one component remotely while receiver plays another.
Resets remote control settings to factory defaults.
Details remote control functions for TV, CATV, and DTV.
Lists remote functions for CD/MD/VCR/DVD/LD/DVR players and cassette decks.
Lists manufacturer codes for various components to be programmed into the remote.
Lists common problems and their remedies for the receiver.
Continues listing common problems and remedies for sound output.
Procedure to reset all receiver settings to factory defaults.
How to set speaker impedance for 6 or 8 Ohm speakers.
Safety precautions for handling the power cord.
Technical details of the amplifier, video, tuner, and miscellaneous sections.
Physical dimensions and list of furnished parts.
Instructions on how to clean the receiver safely.
To Next Page
