Why can't broadcast stations be selected automatically on my Pioneer VSX-AX3-K Receiver?
The antenna may be poorly positioned, so adjust the direction and position for best reception. There may be interference caused by other equipment (fluorescent lamp, motor, etc.), so turn off the equipment causing the noise or move it away from the receiver. The radio signals may be weak, so connect an outdoor AM or FM antenna.
Why does a multi channel DVD source appear to be downmixed from 2 channels during playback on my Pioneer VSX-AX3-K?
The source may be coming from something other than the MULTI CH IN jacks. Check the MULTI CH IN connection and select the type of playback with the MULTI CH IN button.
Why during multi channel playback, there is no sound output from one speaker of my Pioneer Receiver?
That speaker may be set to NO. Set the speaker to YES.
Why is my Pioneer VSX-AX3-K Receiver subwoofer output very low?
Settings may be routing signal away from the subwoofer. To get more signal to the subwoofer, set it to PLUS or choose SMALL for the front speakers.
Why is sound produced from some components, but not from digital components on my Pioneer VSX-AX3-K?
The SIGNAL SELECT may be set incorrectly, so set it to AUTO or according to the type of connections made. The digital inputs may be assigned incorrectly, or not at all, so set the digital input settings correctly. Ensure the digital components are connected properly. The player may not be compatible with the source you’re using, or the player settings are incorrect, so choose a compatible source, or check the player’s manual for the correct settings. If MULTI CH IN mode has been selected, choose one of the listening modes to switch it off automatically. The digital output level may have been turned down on a CD player or other component, so set the digital volume level of the player to full, or to the neutral position.
Why is there no sound output from one set of speakers on my Pioneer VSX-AX3-K Receiver?
The speaker system setting may be set to NO, so change it to YES. Also, the speaker may not be connected properly, so check all connections. The source may have no sound output for that channel, so choose one of the SURROUND listening modes to create a channel for the speaker. The speaker output level may be set too small, so increase it.
Why is there no sound output from the surround back speakers of my Pioneer VSX-AX3-K?
The SB CH MODE may be set to OFF, so set it to ON or AUTO. Also, the source may not be a 6.1 channel playback source, so set the SB CH MODE to ON or AUTO and choose one of the SURROUND listening modes. Ensure the surround back speakers are connected properly. If the surround back channel is set to 1 speaker setting only and the speaker is connected to the right channel output, connect the speaker to the surround back left channel output.
What does THDCT NG blinking in the display of my Pioneer Receiver mean?
The thermistor (temperature sensor) is broken. Turn the receiver off, unplug it from the wall, and call a Pioneer-accredited repair center to look at the problem.
What to do if OVERHEAT blinks in the display and no sound is output from my Pioneer VSX-AX3-K Receiver?
The receiver has gotten too hot. Turn it off and allow it to cool down with good ventilation. It is very likely that you have a heat dispersal and ventilation problem so please follow the instructions in 'Installing the Receiver'.
What does FAN STOP blinking in the display of my Pioneer VSX-AX3-K mean?
Something may be stuck in the fan, or the fan is broken. Remove any foreign object from the fan. If you can’t do this, or the fan is broken, call a Pioneer-accredited repair center to look at the problem.
Details the Multichannel Acoustic Calibration EQ System for easy setup.
Highlights support for Dolby Digital EX, DTS-ES, DTS 96/24, and HD video.
Explains the fundamentals of home theater setup: system, source, and listening modes.
Guide for connecting DVD player and TV, including digital and analog audio.
Instructions for connecting front, center, surround, and surround back speakers.
Step-by-step guide for automatic surround sound configuration using MCACC.
Instructions for connecting various video devices like DVD players and VCRs.
Instructions for connecting digital audio sources via coaxial or optical cables.
Detailed instructions for connecting speaker systems, including surround back.
Overview and explanation of all buttons and indicators on the front panel.
Detailed description of buttons on the remote control and their functions.
Overview of options: SURRBACK SYSTEM, AUTO SETTING, NORMAL, and EXPERT.
Manual adjustment of sound parameters for surround sound.
Guides on selecting speaker sizes and routing bass frequencies.
Balancing sound output levels for individual speakers using test tones.
Adjusting delay levels based on speaker distance for sound depth.
How to play sound sources and adjust volume.
Overview of STEREO, DIRECT, MOVIE, and MUSIC listening modes.
Programming the remote to control other audio/video components.
Mapping digital input terminals to specific components.
Introduction to advanced settings for fine-tuning surround sound.
Precise balancing of sound output levels for each speaker.
Adjusting speaker delay for better sound depth and separation.
Using EQ AUTO SETTING and custom EQ preferences (CUSTOM 1/2).
Details on Dolby Digital, Dialog Normalization, Pro Logic II, and Surround EX.
Information on DTS, DTS-ES, DTS Neo:6, and DTS 96/24 formats.
Guide to diagnosing and resolving problems with power, sound, and unit operation.
To Next Page
General