Need help?Do you have a question about the Pioneer VSX-D812-S and is the answer not in the manual?
General| Channels | 6.1 |
|---|---|
| Amplifier Type | Discrete |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | 100 dB |
| Tuner | AM/FM |
| Power Output (per channel) | 100 W |
| Frequency Response | 5 - 100000 Hz |
| Input Impedance | 47 kΩ |
| Output | Pre-out |
| Speaker Impedance | 8 ohms |
| Digital inputs | 1 optical, 2 coaxial |
| Video inputs | 3 Composite |
| Surround Modes | Dolby Digital, DTS, Pro Logic II |
Covers checking accessories, installation, cable connections, and battery setup.
Details the optimal range and conditions for remote control operation.
Explains the concept of home theater and surround sound.
Guides on hooking up DVD player and TV for surround sound.
Instructions on connecting speakers, including impedance and subwoofer notes.
Guides on using the quick setup feature for system configuration.
Explains automated speaker calibration using the MCACC system.
Instructions for connecting audio/video, S-video, and component video cables.
Explains the use of digital coaxial and optical cables for digital components.
Guides on connecting digital components using coaxial or optical inputs.
Instructions for connecting analog audio components like cassette decks.
How to connect DVD players or decoders with multi-channel analog outputs.
Steps for connecting video components to rear and front panel inputs.
Guides on connecting AM loop and FM wire antennas for reception.
Detailed connection guide for the VSX-D712 speaker system.
Detailed connection guide for the VSX-D812/D912 speaker system.
Explains speaker terminal connection and A/B speaker system selection.
Tips for optimal speaker placement to achieve best sound quality.
Visual guides for overhead and 3D views of speaker setups.
Instructions on connecting external amplifiers to the receiver.
How to control other Pioneer components via the receiver's remote sensor.
Identifies and explains the functions of front panel buttons and displays.
Explains various buttons on the front panel like Listening Mode, Quick Setup, etc.
Describes the various indicators and symbols on the receiver's display.
Details character display, tuner indicators, and master volume display.
Identifies and explains the functions of buttons on the remote control.
Details functions accessible via the remote, including component control and menus.
Explains functions like MPX, D.ACCESS, Source, TV control, etc.
Overview of basic sound options: Stereo/Direct, Standard, and Advanced Surround.
Details on Advanced Surround modes, Sports, Game, Expanded, and stereo modes.
How to select the input signal source for the receiver.
Steps to play back audio in multi-channel formats like Dolby Digital and DTS.
Guide to using Stereo/Direct modes and adjusting Advanced Surround effects.
How to enable and use surround back channels for 6.1 audio.
Explains how to create a virtual surround back channel effect.
How to use Midnight/Loudness features and adjust tone controls.
General guide for playing audio from various sources.
Selecting multi-channel analog inputs and using the sleep timer function.
Overview of receiver setup operations for optimal surround sound.
Details speaker size, distances, dynamic range, and dual mono settings.
Configures subwoofer usage and crossover frequencies for optimal sound.
Adjusts LFE level and front/center speaker distances for audio timing.
Sets distances for surround, surround back, and subwoofer for accurate sound localization.
Adjusts dynamic range compression and selects audio channels for dual mono.
Assigns components to component video inputs for playback.
Configures surround back channels and assigns digital audio sources.
Fine-tunes speaker levels and channel delay using test tones.
Allows adjusting individual speaker levels for different listening modes.
Fine-tunes speaker volume levels and confirms setup for listening modes.
Guides on tuning into FM and AM radio broadcasts using automatic/manual methods.
Tips for better FM stereo reception by switching to mono mode.
Enter frequencies directly using number buttons for station tuning.
Stores radio station frequencies for quick recall via presets.
Assigns custom names to saved station presets for easier identification.
Recalls and plays saved radio station presets.
Adjusts tuning step for country-specific radio frequency compatibility.
Guides on recording audio/video from tuner or connected sources.
Assigns manufacturer preset codes to remote control buttons for component control.
Method for directly entering preset codes for component control.
Teaches remote control to learn commands from other devices.
Resets programmed settings or clears all remote control configurations.
Enables controlling one component while receiver plays another.
Lists remote control functions for operating TVs and DTVs.
Details remote functions for CD players, VCRs, DVD players, etc.
Lists remote functions for specific components like VCR, DVR, DVD, LD.
Lists manufacturer preset codes for controlling various components.
Lists manufacturer preset codes for controlling various components for specific models.
Continues the list of manufacturer preset codes for component control.
Provides solutions for issues like no power, no sound, or poor radio reception.
Solutions for no sound from specific speakers or playback issues.
Solutions for remote control non-operation or dark display.
Procedure to reset receiver settings to factory defaults.
Technical specifications for amplifier power output and audio input/output.
Technical specifications for video, FM/AM tuner, and component video.
Final specs for AM tuner, power, dimensions, weight, and included items.
To Next Page
