EasyManua.ls Logo

Pioneer WYT024GLFI19RL User Manual

Pioneer WYT024GLFI19RL
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CS78421-548-754
DUCTLESS MINI SPLIT SYSTEM AIR CONDITIONER / HEAT PUMP
IMPORTANT NOTICE:
Please read this manual carefully before installing
or operating your new air conditioning system.
Be sure to save this manual for future reference.
Installation &
User’s Manual
WYT Inverter Series
For 9,000-36,000 BTU/hr Systems

Other manuals for Pioneer WYT024GLFI19RL

Question and Answer IconNeed help?

Do you have a question about the Pioneer WYT024GLFI19RL and is the answer not in the manual?

Pioneer WYT024GLFI19RL Specifications

General IconGeneral
Cooling Capacity24000 BTU
SEER19
HSPF10
Voltage208/230 V
RefrigerantR-410A
Power Supply1 Phase, 60 Hz
TypeMini Split

Summary

Safety Precautions

Understanding Safety Symbols

Defines WARNING, CAUTION, and DANGER symbols used in the manual for hazard identification.

Installation and Operational Safety

Provides critical safety guidelines for installation and operation of the air conditioning unit.

Additional Safety Precautions

Covers further safety advice including electrical safety and specific warnings for operation.

Operating Instructions

Indoor Unit Installation Instructions

Indoor Unit Location Selection

Guidelines for choosing an optimal installation location for the indoor unit.

Electrical Connections - Indoor Unit

Instructions and regulations for wiring the indoor unit.

Preparing Refrigerant Piping

Steps for preparing and routing the refrigerant piping from the indoor unit.

Connecting Refrigerant Piping to Indoor Unit

Steps for connecting the refrigerant pipes to the indoor unit.

Outdoor Unit Installation Instructions

Outdoor Unit Location Selection

Guidelines for choosing an optimal installation location for the outdoor unit.

Electrical Safety Regulations

Critical regulations for electrical work on the outdoor unit.

Cable Specifications and Connections

Details on power and signal cable types and wiring.

Power/Signal Wiring to Outdoor Unit

Step-by-step guide for wiring the outdoor unit.

Refrigerant Piping Connection - Preparation

Steps for cutting and preparing refrigerant pipes.

Flaring Pipe Ends

Proper techniques for flaring pipe ends to ensure a good seal.

Connecting Piping to Outdoor Unit

Instructions for connecting the refrigerant pipes to the outdoor unit valves.

Air Evacuation and Bleeding the Circuit

Procedures for removing air and moisture from the refrigeration circuit.

Evacuation Process Steps

Detailed steps for performing the vacuum evacuation process.

Electrical/Gas Leak Check and Test Run

Electrical Safety Checks

Verifies the safety and compliance of the electrical wiring.

Gas Leak Detection Methods

Describes methods for checking refrigerant gas leaks.

Test Run Procedure

Step-by-step guide for performing the system test run.

Post Test Run Checks

Confirms successful operation and checks for leaks after the test run.

Troubleshooting

Related product manuals