To Next PageTo Next Page
Need help?Do you have a question about the Pioneer XV-DV181 and is the answer not in the manual?
Warning against short-circuiting speaker terminals to ground during BTL drive.
Instructions on how to manually open the disc tray when the unit is powered off.
Identification and function of front panel controls and display indicators.
Procedure for cleaning optical pickups and other parts before shipping the product.
Diagram showing the location of various Printed Circuit Boards (PCBs) within the unit.
List of specialized tools (jigs) and lubricants/glues required for service operations.
High-level functional block diagram showing the main system architecture and interconnections.
Detailed block diagram of the DVD loading and decoding mechanism and its signal paths.
Table outlining common symptoms, diagnostic steps, and possible defective points for DVD playback issues.
Explanation of the information displayed on the FL controller during test mode operation.
Mapping of shortcut keys on the remote control to specific service functions like error rate calculation.
Details on how to display and interpret model information, including region and version numbers.
Description of service mode displays, including ID address, error rate calculation, and error history.
Procedure for safely removing the front panel assembly, including screw and hook locations.
Instructions for removing the DVD MECHA Assy, including connector disconnection and screw removal.
Diagrams showing the correct routing and placement of flexible cables during reassembly.
Steps to confirm the existing ID number or check for its absence, and exit the mode.
Procedure for inputting ID data from a special DVD disc to the unit's flash ROM.
Exploded view illustrating the external parts of the unit and their assembly positions.
List of part numbers for the external components shown in the exterior section diagram.
Exploded view of the front panel assembly, detailing its components and their placement.
List of part numbers for the components of the front panel assembly.
Exploded view of the DVD MECHA Assy, showing parts and lubrication points.
Comprehensive list of part numbers for the DVD MECHA Assy components.
Part 2 of the schematic diagram for the 09 DVDM Assy, showing the remaining circuit details.
Part 1 of the schematic diagram for the RHTS SYSMAIN ASSY, detailing its circuitry.
Schematic diagram for the RHTS USB ASSY, illustrating its connections and components.
Part 1 of the schematic diagram for the RHTS D-AMP ASSY, showing amplifier circuitry.
Part 2 of the schematic diagram for the RHTS D-AMP ASSY, detailing amplifier output stages.
Schematic diagram for the RHTS DISPLAY ASSY, showing connections to the front panel display.
Schematic diagram for the EUROSCART ASSY, detailing SCART signal connections.
Diagram showing the component layout and connector pinouts for the RHTS SYSMAIN ASSY.
Component layout diagrams for the RHTS D-AMP ASSY, indicating positions of key parts and connectors.
Component layout diagrams for the RHTS DISPLAY ASSY, showing placement on both sides of the PCB.
Component layout diagram of the Power Supply Unit PCB, illustrating component placement.
Component layout diagrams for the EUROSCART ASSY, showing placement on both sides of the PCB.
Details on model-specific variations for major PCB assemblies, highlighting differences.
General