To Next PageTo Next Page
Need help?Do you have a question about the Pit Boss Navigator PB850G and is the answer not in the manual?
General| Grill Category | Pellet Grill |
|---|---|
| Type | Freestanding |
| Temperature Range | 180°F to 500°F |
| Wi-Fi Connectivity | Yes |
| Fuel Type | Wood Pellets |
| Material | Steel |
| Ignition | Automatic |
| Warranty | 5 Years |
| Cooking Area | 850 sq. in. |
| BTU Value | 25, 000 BTU |
Details the voltage, frequency, wattage, and plug type for the appliance.
Attaches the trim pieces to the front legs for caster wheel locking.
Mounts support plates to legs and inserts caster wheels with brakes.
Attaches wheels and support plates to the rear legs.
Secures long support plates to legs for standard wheels.
Secures long support plates to legs for caster wheels.
Attaches the main barrel assembly to the cart frame using screws.
Attaches long support plates to the main grill barrel.
Installs the lid stopper onto the top of the main barrel.
Attaches the lid handle and bezel to the grill lid.
Installs the flame broiler main plate and slider for heat control.
Connects the adjusting bar to the flame broiler slider for control.
Attaches the side shelf to the main barrel using screws.
Attaches front shelf support brackets to the front support legs.
Places the front shelf onto the support brackets or bottom plates.
Places cooking grids and warming rack onto the grill ledges.
Mounts the grease bucket onto the spout hook at the end of the barrel.
Details connecting the appliance to standard, GFCI, or mobile power sources.
