Piusi ATEX K33 - B CONFORMITY; B1 DECLARATION OF CONFORMITY; C MACHINE DESCRIPTION

18 M0268 EN
EN (Translated from Italian)
B CONFORMITY
B1 DECLARATION OF CONFORMITY (94/9/CE, Annex X, lett. B)
The manufacturer: PIUSI S.p.A.
Via Pacinotti, 16/A
46029 Suzzara (MN) Italy
Declares under its own responsibility that the machine:
Type: Meter
Model: K33 ATEX
Year of manufacture: refer to the year of production shown on the CE plate axed to the prod-
uct.
CERTIFIES THAT
comply with all relevant provisions of the following directives:
- 94/9/CE
and the following harmonized standards, applied standards and/or technical specications:
UNI EN 1127-1:2011; UNI EN 13463-1:2009; UNI EN 13463-5:2011
This equipment is classied as follows:
Group II, category 2 G c IIB T=85° C (T6)
Read the Use and Maintenance manual before using the pump..
Place: Suzzara (Mn)
Date: 22/02/2012
Legal Representative
C MACHINE DESCRIPTION
K33 atex is mechanical owmeter with nutating disk,
designed toallow a precise measurement of Diesel oil or
other uids compatible with the manufacturing material.
The nutating disk of the metering chamber (seediagram
1, drawing “15”), which is setin motion by the uid itself,
drives thegear train located in the cover of themeter body
(drawing “8”) which transmitsthe motion to the meter (pos.
“6”). The meter is equipped with a non-resettable litre to-
taliser and a batch register which can be reset by means of
a knob (Pos. “2”) whose unit digit is provided with marks for
the readout ofthe tenths of a litre.
ATTENTION
To ensure a proper and safe use of the meter it is nec-
essary to read and follow the instructions and warn-
ings contained in this manual. An improper installa-
tion or use of the meter may cause damage to objects
and people.