20 M0268 EN
EN (Translated from Italian)
C2 INTENDED USE
INTENDED
USE
APPLIANCE FOR THE MEASUREMENT OF FUEL SUITABLE
FOR OPERATING IN ZONES CLASSIFIED“1”AND “2”, AC-
CORDING TO DIRECTIVE 99/92/CE
THE DETERMINATION OF THE AREAS (ZONES) IS TO
BE CARRIED OUT BY THE USER
FORBIDDEN
USE
Using the appliance for uids other than those listed at
paragraph “H2 – Fluids permitted” and for uses other than
those described at the item “authorised use” is forbidden.
PLANT OPERATION RESTRICTIONS
IT IS FORBIDDEN:
1
To use the appliance in a construction conguration other
than that contemplated by the manufacturer
2
To use the appliance with xed guards tampered with or
removed.
3
To use the appliance in places where there is risk of explo-
sion and/or res classied in the following zones:
0; 20; 21; 22
4
To integrate other systems and/or equipment not consid-
ered by the manufacturer in the executive project.
5
To connect the appliance up to energy sources other than
those contemplated by the manufacturer
6
To use the commercial devices for purposes other than
those indicated by the manufacturer.
7
Don’t use in presence of lightnings
C3 HANDLING AND TRANSPORT
Due to the limited weight and dimensions of the METERS, special lifting equipment
is not required to handle them. THE APPLIANCES ARE CAREFULLY PACKED before dis-
patch. Check the packing when receiving the material and store in a dry place.
To Next Page
