PSM15 V10.02
16
d) Transmitter Operation Mode
1. The updated information will be sent to receiver after every setting is done.
2. Transmitter and camera set as M
Above setting only work with King output setting which is not support Canon
original wireless flash mode. Those functions are work with the compatible flash.
Thank you for purchasing PIXEL product and read this instruction manual
carefully. If you have any question please kindly to contact our local dealer or visit
to http://www.pixelhk.com
This instruction manual is updated at 01st July, 2011. Please contact the PIXEL
seller to get the information if you want to use this product combined with other
latest product, which published after this date.
Firmware upgrade link: http//: www.pixelhk.com/down/king
To Previous Page
Loading...
